XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Eluktronics
A 250GB 2.5-inch SATA internal SSD using MLC NAND with sequential read speeds up to 560MB/s and write speeds up to 515MB/s
The Eluktronics Eluktro Pro is a 2.5 inch internal solid state drive built with MLC flash and a SATA III interface. It fits standard 7 mm drive bays in laptops and desktops, offering 250 GB of capacity for operating systems, applications and data.
The drive measures 100.2 by 70.0 by 7.0 mm and weighs 79 g, so it slides into thin ultrabooks or desktop trays without a bracket. A SATA 3.0 connection supplies both data and power, while backwards compatibility with 3 Gb/s and 1.5 Gb/s hosts keeps older systems working.
Sequential reads reach 560 MB/s and writes reach 515 MB/s, with 4K random write IOPS up to 90 000. Power draw stays at 1.0 W idle and 3.0 W active, and the drive is rated for 0 to 70 °C operation with a 1.5 million hour MTBF and 1500 G shock resistance.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Model name | Eluktro Pro |
| Part number | TRO-250 GB-PRO |
| Total capacity | 250 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Storage | |
| NAND flash type | MLC |
| Ports & slots | |
| Interface type | SATA III |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
The operating temperature range tops out at 70 °C, so sustained workloads should stay below that threshold.
Active power draw is 3.0 W and idle is 1.0 W, giving low heat output for continuous operation.
A SATA III (6 Gb/s) port is required; the drive is backward compatible with SATA 3 Gb/s and 1.5 Gb/s.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?