We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided Y-cable with one 3-pin female and two 3-pin male connectors, 10 inches long

EN-Labs

EN-Labs 3PINSPL310 3-pin fan power splitter cord 10 inch

SKU CH-EJVD-YS0MF

Splits one 3-pin fan header into two, adding 10 inches of sleeved reach for case-fan placement

  • Cable length25 cm
  • First connector3pin fan female
  • Second connector3 × 3pin fan male
  • Connector count4
  • Product type3pin fan power splitter
  • Product colorBlack

Style 3pin 1X2

  • Connect two 3-pin fans to one motherboard header
  • 10 inch length gives flexible fan placement
  • Black braided sleeve protects wires inside the case
  • Fans run at full constant speed
  • No PWM control — voltage-only operation

What it is

The EN-Labs 3PINSPL310 is a 10-inch black sleeved cable that splits one 3-pin fan header into two male 3-pin connectors, letting two TX3 fans draw power from a single motherboard or power-supply header. It suits builders adding extra case or CPU cooling without free headers.

Build and daily use

The 25 cm braided jacket protects wires inside the chassis and eases routing around tight corners, while the female end plugs directly onto the board and the two male ends attach to fans for a secure friction fit. Because the splitter lacks PWM circuitry both fans run at full speed whenever the header is energised.

The deciding spec

This adapter does not pass PWM control signals, so fan speed cannot be regulated by the motherboard; buyers who need variable-speed or quiet operation should choose a different solution.

How it compares

Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 93% of the 433 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEn-Labs
Model name3PINSPL310
Product type3pin fan power splitter
Product colorBlack
Ports & slots
First connector3pin fan female
Second connector3 × 3pin fan male
Connector count4
Size & build
Overall length10 in (25.4 cm)
Cable length25 cm

Other versions of this model

1 more in the same range

Questions about this item

Does the 3-pin header limit fan speed control compared to a 4-pin PWM header?

Yes — the cable carries only power, ground and tachometer signals, so connected fans run at full voltage and cannot be PWM-regulated by the motherboard.

What clearance does the 10-inch sleeved assembly need behind the motherboard tray?

The braided Y-splitter measures 25 cm end-to-end; allow at least that depth plus room for the two male connectors to seat without bending the sleeve.

Which connector plugs into the motherboard fan header and which go to the fans?

The single 3-pin female header attaches to the motherboard or PSU 3-pin male, while the two 3-pin male headers connect to the case or CPU fans.

More in Y-Splitter Power Cables

Similar items