We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue .5 m Mini SAS SFF-8087 to four right-angle SATA breakout cable with woven mesh sleeve and P1-P4 markers

EN-Labs

EN-Labs .5 m Mini SAS 36-pin SFF-8087 to 90° 4× SATA 7-pin Breakout Cable

SKU CH-PH6H-QBW3G

Connects a RAID or PCIe controller with an SFF-8087 port to four SATA drives, supporting 6Gb/s transfer rates with a 90-degree breakout design for tight spaces

  • Connector count5
  • Connector detailsSFF-8087 to 4 X SATA
  • Conductor typeCopper Conductor
  • Supported platformsWorks with Windows Vista
  • Product typeSAS
  • Product colorBlue
  • Connect RAID controller to four SATA drives via single SFF-8087 port
  • 6 Gb/s bandwidth per drive for high-throughput storage access
  • Right-angle SATA connectors and .5 m length simplify tight chassis routing
  • Woven mesh sheath protects conductors while keeping cable flexible
  • P1–P4 markers give instant port identification after installation

Internal SAS breakout cable

This 0.5 metre internal cable connects a RAID or PCIe controller with an SFF-8087 port to four discrete SATA drives. It is built for system builders and server administrators who need to attach multiple SATA devices to a single mini SAS host port. The woven mesh sheath covers half the length for easier routing inside chassis.

SFF-8087 to four SATA 6 Gb/s

The single specification that decides fit is the SFF-8087 male host connector breaking out to four SATA female target connectors, each supporting up to 6 Gb/s data transfer per drive. The 36-pin mini SAS interface spans compatible controller arrays across two PCIe 2.0 x8 lanes. Verify your controller presents an SFF-8087 port before purchase.

Passive copper with drain wire

Thermals, noise and power draw are negligible because the assembly is a passive copper cable with a tinned copper drain wire at 30 AWG. No active components generate heat or require cooling. The blue net jacket adds minimal bulk while protecting conductors during installation and long-term use.

How it compares

Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 94% of the 1,224 comparable items (median $26.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeSAS
Product colorBlue
Ports & slots
Connector count5
Connector detailsSFF-8087 to 4 X SATA
Size & build
Overall length0.5 Meter
Cable shieldingYes
Conductor typeCopper Conductor
Compatibility
Supported platformsWorks with Windows Vista

Questions about this item

What does the 6 Gb/s bandwidth mean once the cable is installed in a server?

Each of the four SATA drives can transfer data at up to 6 Gb/s, so the cable does not bottleneck modern SSDs or HDDs connected to a compatible RAID or HBA card.

Which interface standard does the SFF-8087 connector use and what does it cap in practice?

The SFF-8087 end uses the SAS 6 Gb/s electrical standard, so the link is limited to 6 Gb/s per lane regardless of the controller’s higher capability.

How much clearance does the 90-degree SATA plug need behind the drive backplane?

The right-angle SATA connectors sit flush against the drive, requiring only the depth of the plug itself plus the 0.5 m cable bend radius for routing.

More in SAS, SCSI, InfiniBand & MCIO Cables

Similar items