EN-Labs SFF80874SATA50CM90 Mini SAS SFF-8087 to 4 x Right Angle SATA Cable 50cm 6Gb/s
Connects a Mini SAS SFF-8087 controller to four right-angle SATA drives at 6Gb/s over a 50cm cable
- Rated speed6Gb/s
- Connector count5
- Connector details1 x SFF-8087 to 4 X SATA (Right Angle 90 degree)
- Product typeInternal mini SAS
- Product colorBlack / Blue
- Overall length1.64 ft / 50CM
- Connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives
- Right-angle SATA connectors simplify routing in tight chassis spaces
- Supports up to 6Gb/s data transfer rate per drive
- 50 cm cable length with woven mesh sheath for easy routing
- P1 to P4 markers provide easy identification after installation
Mini SAS SFF-8087 breakout cable
This internal cable connects a RAID or PCIe controller equipped with an SFF-8087 port to four discrete SATA drives. The 36-pin Mini SAS male plug splits into four right-angle SATA female connectors, each rated for 6Gb/s data transfer. A woven mesh sheath covers half the .5 metre length for easier routing, and P1 to P4 markers simplify drive identification after installation.
Verify controller port and drive orientation
Before ordering, confirm that your host bus adapter or RAID card presents a Mini SAS SFF-8087 male interface with a latch. The breakout end supplies four right-angle SATA 7-pin female sockets, so each target drive or backplane must accept a standard SATA data connector mounted at 90 degrees. Cable reach is 1.64 feet from the controller port to the furthest drive connector.
Passive design runs cool and silent
The assembly contains no active electronics, fans or power circuitry, so it adds no heat or audible noise to the chassis. Power for the attached drives is supplied separately through the drive power connectors on your backplane or power supply. The thin, flexible cable with partial mesh sleeving keeps airflow paths clear in dense storage enclosures.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 94% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | EN-Lab |
| Model name | SFF80874SATA50CM90 |
| Product type | Internal mini SAS |
| Product color | Black / Blue |
| Performance | |
| Rated speed | 6Gb/s |
| Ports & slots | |
| Connector count | 5 |
| Connector details | 1 x SFF-8087 to 4 X SATA (Right Angle 90 degree) |
| Size & build | |
| Overall length | 1.64 ft / 50CM |
Questions about this item
What connectors are included and do I need any extra cables?
The cable has one SFF-8087 male connector with latch on one end and four right-angle SATA 7-pin female connectors with latches on the other. No additional cables are required for a direct controller-to-drive link.
The part number shows 50 cm and 1.64 ft — are both lengths the same cable?
Yes, 50 cm and 1.64 ft describe the identical 0.5 m cable length. Choose this length when the controller and backplane are close together inside the chassis.
The spec lists 6 Gb/s — what does that mean for each connected drive?
Each of the four SATA drives can transfer data at up to 6 Gb/s, matching the SATA 6 Gb/s standard supported by compatible RAID or HBA controllers.
More in SAS, SCSI, InfiniBand & MCIO Cables
Similar items
EN-Labs SFF86434SATA50CM SAS cable SFF-8643 to 4 SATA 50 cm 12 Gbps
- SFF-8643 to SATA
- Black & Blue
Mellanox Technologies MFA1A00-E001 LinkX InfiniBand cable QSFP+ 3.28 ft
EN-Labs .5 m Mini SAS 36-pin SFF-8087 to 90° 4× SATA 7-pin Breakout Cable
- SFF-8087 to 4 X SATA
- SAS





