We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twenty silver aluminium heatsinks, 14 by 14 by 10mm, extruded fins

EN-Labs

EN-Labs Aluminium Heatsink 14x14x10mm 20pcs DIY Cooling

SKU CH-KYR5-ZVCJP

Pack of 20 aluminium heatsinks, each 14x14x10mm, for cooling ICs, MOSFETs and voltage regulators

  • Product colorSilver
  • Compatible withMotherboard Chipsets
  • Main materialAluminium
  • Key featuresProduct Description Aluminum IC heatsink for Router,power tr
  • Product dimensions14 × 14 × 10 mm
  • Compact 14 by 14 millimetre footprint fits tight board layouts
  • Extruded aluminium fins dissipate heat from MOSFETs and voltage regulators
  • Ten millimetre height clears low-profile enclosure limits
  • Twenty pieces per pack support multi-device cooling projects
  • Light 55 gram total weight adds minimal mass to assemblies

Aluminium Heatsink 14x14x10mm 20pcs

This pack supplies twenty aluminium heatsinks measuring 14x14x10mm each. They are designed for DIY cooling of small electronic chips such as MOSFETs, voltage regulators and router ICs. The silver finish suits a variety of board layouts. Hobbyists and repair technicians will find the quantity convenient for multiple projects.

Extruded Fin Height 10mm

The critical dimension is the 10mm fin height which determines whether the heatsink clears adjacent components and enclosure lids. At 10mm tall the profile fits many low-profile applications but will not suit boards with tighter vertical clearance. Verify the available space above your target chip before purchase.

Pack Of Twenty For Multi Chip Boards

Twenty pieces cover boards with several discrete power devices such as FETs, SCRs or amplifier ICs. The aluminium mass provides modest thermal capacity for low to medium power dissipation. It runs out when sustained loads exceed what natural convection from this surface area can reject. Adhesive glue is required and not included.

How it compares

Measured against everything we stock in Heatsinks & Water Blocks, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 80% of the 609 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product colorSilver
Size & build
Main materialAluminium
Product dimensions14 × 14 × 10 mm
Compatibility
Compatible withMotherboard Chipsets

Questions about this item

How much does the 14x14x10mm heatsink lower chip temperature in a real build?

The aluminium fin array adds surface area so a MOSFET or voltage regulator runs cooler, but the exact drop depends on the component's power draw and the airflow inside the case.

What mounting method does the 14x14mm base require?

Thermal adhesive glue is needed to bond the flat 14x14mm base to the IC; no clips, screws or pre-applied tape are supplied.

Will the 10mm height and 14mm footprint clear surrounding components on a crowded board?

Each sink stands 10mm tall with a 14x14mm square footprint and weighs 55g for the 20-piece pack, so measure nearby capacitors and connectors before gluing.

More in Heatsinks & Water Blocks

Similar items