We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and yellow 8-inch PCIe power splitter cable, one 8-pin male to two 6+2-pin female connectors

EN-Labs

EN-Labs PCIE8PSPL8P20CM PCIe 8pin to 2 x 8pin(6+2) power splitter cord 8 inch

SKU CH-AS5D-YYP7P

Splits one PCIe 8-pin PSU connector into two 6+2-pin GPU plugs using 18 AWG copper wire

  • Cable length8 in (20.3 cm)
  • First connectorPCIe 8pin Male
  • Second connector2 x PCIe 8pin(6+2) female
  • Connector count3
  • Product typePCIe 8pin to 2 x PCIe8pin(6+2) splitter
  • Product colorBlack & Yellow

Cable Length 8 in.

  • Splits one PSU 8-pin into two GPU connectors
  • 8-inch length keeps cable routing tidy inside the case
  • 18 AWG copper conductors deliver stable current to the card
  • Self-locking key-rail connectors prevent accidental disconnection
  • Compatible with 6-pin and 8-pin graphics cards

PCIe 8-pin power splitter for dual GPUs

This EN-Labs cable splits a single PCIe 8-pin male connector from the power supply into two 8-pin (6+2) female connectors. It lets builders feed two graphics cards from one PSU output, simplifying multi-GPU or mining rigs that need extra PCIe power plugs. The 8-inch length keeps routing tidy inside compact cases.

UL-listed 18 AWG conductors and self-locking design

The splitter uses UL-listed 18 AWG tinned copper cores with PVC insulation for stable current delivery. Keyed rails on the male PSU connector and the female GPU headers lock securely, reducing the risk of accidental disconnection under vibration or cable strain. No active cooling or fan headers are involved, so the assembly adds no audible noise.

Fits standard 6-pin and 8-pin graphics cards

Compatible with 6-pin and 8-pin PCIe power inputs on cards from ASUS, ASRock, Radeon, Sapphire, EVGA and Gigabyte. The 6+2 pin male ends adapt to either socket type without adapters. Builders must ensure the power supply can deliver sufficient total wattage for both attached GPUs; the cable itself does not increase the PSU’s rated output.

How it compares

Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 92% of the 433 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Labs
Model namePCIE8PSPL8P20CM
Product typePCIe 8pin to 2 x PCIe8pin(6+2) splitter
Product colorBlack & Yellow
Ports & slots
First connectorPCIe 8pin Male
Second connector2 x PCIe 8pin(6+2) female
Connector count3
Size & build
Overall length8 in (20.3 cm)
Cable length8 in (20.3 cm)

Other versions of this model

3 more in the same range

Questions about this item

How do I install the EN-Labs PCIE8PSPL8P20CM splitter and which connector orientation is the step people often reverse?

Plug the 8-pin male connector with key rail into the PSU PCIe port until it clicks, then attach each 6+2-pin male end to the graphics card; the key rail only fits one way, so forcing it backwards is the common mistake.

What maintenance or replacement will the EN-Labs PCIE8PSPL8P20CM need after extended use?

Inspect the 18AWG tinned copper conductors and PVC jacket periodically for heat discoloration or cracked insulation; replace the cable if the self-locking latch no longer holds securely.

What limit appears first on the EN-Labs PCIE8PSPL8P20CM when powering two GPUs continuously under load?

The single 8-pin PSU connection and 18AWG wire gauge set the current ceiling, so sustained draw from both 6+2-pin outputs will hit that supply bottleneck before the cable itself fails.

More in Y-Splitter Power Cables

Similar items