We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved SATA cable splitting into five 4-pin PWM fan connectors and one motherboard feedback header, 16.9 inches long

EN-Labs

EN-Labs SATA5TX443CM SATA to 5x 4-pin PWM splitter cable 16.9 inch

SKU CH-752F-C4MZ0

Connects up to five PWM or 3-pin fans to a single motherboard header using a SATA 15-pin power source, with one TX4 female connector for RPM feedback and synchronised speed control

  • Cable length16.9 in (42.9 cm)
  • First connectorSATA 15pin
  • Second connectorPMW 4pin header
  • Connector count7
  • Product typePWM Spliter Fan Power Cable
  • Product colorBlack

Style PWM x 5

  • Connects five PWM fans from one SATA power connector
  • Black sleeved jacket keeps cable routing tidy inside the case
  • One TX4 female header links to motherboard for RPM feedback and PWM speed control
  • Only the priority fan reports RPM so monitoring stays accurate
  • 9 inch length suits typical mid-tower chassis layouts

SATA-powered 5-fan PWM splitter

This cable draws 12 V DC from a single 15-pin SATA connector on the power supply and distributes it to five 4-pin PWM fans. One TX4 female header connects to the motherboard so the board receives an RPM signal and sends PWM control to all attached fans. The black sleeved jacket keeps the 16.9-inch length tidy inside the case. Builders who want to run more than five fans from one header cannot use this adapter.

Upgrade from a single motherboard header

Most motherboards provide only one CPU or chassis fan header with PWM control, limiting the number of fans that can be speed-managed together. This splitter lets five fans share that header while the motherboard still reads a single tach signal from the priority connector. The jump is worth it when case airflow demands several fans but the board lacks enough headers. Systems that require independent speed curves for each fan will not benefit.

Sustained 12 V delivery across all connectors

Power travels through the SATA connection directly from the PSU, so fan current does not pass through the motherboard header. The 16.9-inch sleeved cable maintains consistent voltage to all five TX4 male plugs during continuous operation. Only the priority fan reports RPM, preventing signal bounce while the remaining fans follow the same PWM duty cycle. The adapter is rated for 12 V DC fans only and must not be used with 5 V DC models.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 90% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEn-Labs
Model nameSATA5TX443CM
Product typePWM Spliter Fan Power Cable
Product colorBlack
Ports & slots
First connectorSATA 15pin
Second connectorPMW 4pin header
Connector count7
Size & build
Overall length16.9 in (42.9 cm)
Cable length16.9 in (42.9 cm)

Other versions of this model

1 more in the same range

Questions about this item

Will the 16.9 inch cable reach from my PSU SATA connector to the fan cluster?

The cable is 16.9 inches long, measured from the SATA 15-pin plug to the splitter block, so check your case layout against that length.

Which of the six 4-pin connectors must go to the motherboard header for PWM control?

Only the single TX4 female header carries the full four pins; plug that one into the motherboard fan header to enable RPM feedback and PWM speed control for all five fans.

Do I need to replace the sleeved cable or any connectors after extended use?

The black sleeved jacket and SATA 15-pin to TX4 connectors are passive components with no moving parts; they do not require scheduled replacement unless physical damage occurs.

More in Internal PSU & Riser Cables

Similar items