Enfain 4503-4513 fibre optic cable 25m black PMMA 1.0mm core 2.2mm diameter 650/530nm -55 to +85°C
A 25 m single-core plastic optical fibre patch cord with a 1.0 mm PMMA core, 2.2 mm black jacket and 650/530 nm operation from –55 °C to +85 °C
- Large bandwidth and EMI-free transmission for clean signals
- Operates reliably from -55 to +85 °C in harsh environments
- PMMA jacket resists wear and corrosion for long service life
- 0 mm core with 0.50 NA supports 650 / 530 nm wavelengths
- Simple plug-in installation requires no ongoing maintenance
25 m single-core POF cable
This 25 metre single-core plastic optical fibre cable is built for industrial and medical links that demand electrical isolation. The PMMA core and black jacket resist wear, corrosion and temperatures from -55 to +85 °C. It suits installers who need a lightweight, maintenance-free run between high-voltage drives or servo controllers.
1.0 mm core at 650 or 530 nm
The 1.0 mm PMMA core operates at 650 or 530 nm wavelength with a 0.50 numerical aperture, so the link budget hinges on matching transceivers to those exact parameters. Joint loss and transmission loss figures are not supplied, so verify the receiver sensitivity before specifying the run.
25 m reach with >70 N tensile strength
The 2.2 mm finished diameter withstands pulling forces above 70 N, giving headroom for conduit pulls and tray routing. At 25 metres the attenuation budget is fixed by the 1.0 mm core; longer runs or higher bandwidth needs will exceed the cable's capability.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $46.99
- Pricier than about 64% of the 812 comparable items (median $29.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Enfain 4501-4511 Plastic Optical Fibre Cable 20m 1.0mm Core 2.2mm Jacket
Questions about this item
What does the 1.0 mm core diameter mean for actual light coupling?
The 1.0 mm core is standard for plastic optical fibre and matches common 650 nm or 530 nm transceivers, so coupling loss stays low when connectors are polished correctly.
How does the 0.50 numerical aperture limit the link?
A 0.50 NA accepts light within roughly 30 degrees, which is typical for POF and works with standard HFBR-style modules, but it will not support tighter-aperture glass-fibre interfaces.
Will the 2.2 mm black PMMA jacket fit through standard 3 mm cable glands?
Yes, the 2.2 mm finished diameter passes through 3 mm glands with clearance, and the PMMA jacket handles the specified -55 °C to +85 °C range without cracking.
More in Fiber Optic Patch Cables
Similar items
Tripp Lite N820-10M 32.81 ft 10Gb Aqua Duplex Multimode 50/125 Fibre Optic Cable
- Fiber Optic
- Aqua
Black Box Corporation EFN310-002M-LCLC Single-Mode 9-Micron Duplex Fibre Optic Cable LC-LC PVC 2-m 6.5-ft
- Others
- Yellow
Belkin F2F202LL-15M 49 ft fibre optic cable
- Fiber Optic
- Orange
Tripp Lite N816-15M 50 ft Aqua Duplex fibre optic cable
- Others
- Aqua
Black Box Corporation EFN6021-002M fibre optic cable OM2 50-micron LC-SC orange 2m
- Fiber Optic Cables
- Orange
Moocci 4× FC Male–LC Female & 4× LC/UPC Loopback Adapters 9/125 µm
- Auxiliary
- Fiber Optic










