Enfain 4503-4513Z fibre optic cable 10m 1.0mm core 2.2mm PMMA 650/530nm
Single-core plastic optical fibre patch cord, 10 m length with 1.0 mm core and 2.2 mm PMMA jacket for 650/530 nm links
- Wide bandwidth and EMI-free transmission for reliable signals
- Immune to extreme temperatures from -55 to +85 °C
- Durable PMMA jacket resists wear and corrosion
- Simple plug-and-play installation with no maintenance needed
- 0 mm core and 2.2 mm diameter suit 650/530 nm links
Single-core POF cable 10 m
This 10 m single-core plastic optical fibre cable uses a 1.0 mm PMMA core inside a 2.2 mm black jacket. It operates at 650 nm or 530 nm and is intended for links that need electrical isolation such as high-voltage frequency converters, servo drives or medical equipment.
Thermals noise and power
The PMMA construction is rated for continuous use from -55 °C to +85 °C and resists electromagnetic interference by design. As a passive optical link it draws no power and produces no acoustic noise, making it suitable for electrically noisy cabinets or temperature-variable enclosures.
Build quality and daily fit
The cable withstands tensile loads above 70 N and the polished PMMA outer skin resists wear and corrosion. A numerical aperture of 0.50 eases alignment during termination, and the supplier notes that no ongoing maintenance is required once the link is installed.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $30.99
- Typical for this category: the median of 812 items is $29.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Enfain 4501-4511 POF fibre optic cable 1.0 mm core 2.2 mm jacket 5m
Enfain LC-LC OM5 Duplex Fibre Optic Cable 50/125µm 3.0mm Lemon Green 5m
Enfain 4501-4511 Plastic Optical Fiber Cable 10m 1.0mm Core 2.2mm OD
Questions about this item
How do I install the 1.0 mm core POF cable without damaging the polished ends?
Strip the 2.2 mm PMMA jacket carefully, clean the 1.0 mm core face with lint-free wipes and isopropyl alcohol, then insert fully into the 4503/4513Z connector until it clicks; the step most people skip is the final microscope inspection for scratches before locking the latch.
What maintenance or replacement will this 10 m PMMA fibre need over its service life?
The manufacturer states no maintenance or repair is required; replacement is only necessary if the black outer jacket shows cuts, the core end-face is cracked, or tensile load has exceeded 70 N during routing.
At what point does signal loss become the limiting factor during sustained high-temperature operation?
The cable is rated for continuous use up to 85 °C; beyond that the PMMA core softens and attenuation at 650/530 nm rises sharply, so the 85 °C operating ceiling is the first limit reached under sustained thermal load.
More in Fiber Optic Patch Cables
Similar items
STARTECH FIBSTST1 fibre optic cable ST-ST 3.28 ft 62.5/125 OM1
- Cable Connectors
- Orange
Tripp Lite N820-10M 32.81 ft 10Gb Aqua Duplex Multimode 50/125 Fibre Optic Cable
- Fiber Optic
- Aqua
Panduit FZ2ERLNLNSNM003 fibre optic cable OM4 duplex LC 10 ft 1.6 mm
- 1 x LC Network
- Fiber Optic
Tripp Lite N816-15M 50 ft Aqua Duplex fibre optic cable
- Others
- Aqua
Ficer Technology Co., Ltd 25G SFP28 DAC Cable 3m 30AWG Passive
- SFP28 to SFP28
- Others










