Enfain MT-ViK SDI Video Cable 10m BNC cable
A 10-metre BNC cable with oxygen-free copper core and aluminium-foil shielding for SDI video signals
- Cable length10m
Cable Length 10m
- 10 m length suits studio and field installations
- Oxygen-free copper core reduces signal loss
- Aluminium foil plus woven mesh shielding blocks interference
- PVC jacket with rubber coating resists wear
- 75 Ω coaxial design matches SDI impedance
10 m SDI video cable
The Enfain MT-ViK SDI Video Cable is a 10 metre BNC coaxial line built for professional high-definition video monitoring. Its 75 ohm characteristic impedance matches broadcast-grade SDI equipment, while the oxygen-free copper core and aluminium-foil-plus-woven-mesh shield protect signal integrity over the full run.
Suitable for fixed studio or OB installs
Installers routing a single 3G-SDI or HD-SDI link between camera, switcher or monitor will find the 10 metre length and rugged PVC-rubber jacket practical for permanent or semi-permanent runs. Users who need multiple parallel cables, shorter patch leads, or a different connector type should consider other options.
Handles 10 m SDI runs with headroom to 20 m
The cable specification covers lengths from 1.5 m up to 20 m, so the 10 m version sits comfortably in the middle of the supported range with margin for signal loss. Runs beyond 20 m are outside the rated series and would require a different cable construction.
How it compares
Measured against everything we stock in BNC & CCTV Video Cables, at today’s prices. Recalculated every night.
- Price $55.99
- Pricier than about 72% of the 129 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Cable length | 10m |
Other versions of this model
5 more in the same range
Questions about this item
What devices must already have BNC connectors to use this 10 m SDI cable?
Any camera, monitor, switcher or recorder with a standard BNC socket can connect directly to the cable's BNC plugs.
Will the 75 euro coaxial construction interfere with legacy analogue video gear kept in the rack?
The 75 ohm impedance matches both modern SDI and older analogue video, so the cable works alongside legacy equipment without signal mismatch.
How can I verify the oxygen-free copper core is passing a clean 3G-SDI signal after installation?
Check the receiving monitor for a stable, error-free picture at the expected resolution and confirm no sparkles or dropouts appear during movement.
More in BNC & CCTV Video Cables
Similar items
Cables To Go 40025 BNC Cable 75 Ohm RG59 3 ft 0.91 m Black Male Male Double Shielded
- Cable Connectors
- Black
Cables To Go 40029 BNC cable male to male 25 ft 75 ohm RG59 double shielded black
- Coaxial
- Black










