Enfain NW193 RJ45 Cat7 connectors 10 pack 50U gold 1.30mm aperture
Shielded Cat7 RJ45 connectors with 50U gold contacts and 1.30mm aperture for 10-gigabit networks
Style 100 Packs
- 10 Packs$14.99
- 100 Packs$150.99
- 10 connectors ready for 10-gigabit networks
- 50U gold plating resists corrosion on every contact
- Three-prong contacts grip solid and stranded wire
- 30 mm aperture fits standard Cat7 cable
- Brass shell shields signal from interference
Engineering-grade Cat7 RJ45 plugs
These UGREEN NW193 connectors are built for installers and network engineers terminating shielded Category 7 cable for 10-gigabit links. The brass shell and three-prong contact design suit professional patch-panel and field-termination work where reliable throughput matters.
Brass shell and 50U gold contacts
A brass housing provides mechanical rigidity while 50-micron gold plating on the contact copper sheets resists oxidation over repeated mating cycles. The 1.30 mm conductor aperture accepts solid or stranded cores typical of Cat7 installation cable, and the shielded RJ45 interface maintains grounding continuity through the connector body.
10-pack limits project scale
Supplied in a 10-piece pack, the quantity covers a single small cabinet or a handful of wall outlets but falls short for larger structured-cabling jobs. Buyers wiring full floors or data-centre rows will need multiple packs, and the Category 7 rating does not extend performance beyond the 10-gigabit standard the connectors are designed for.
How it compares
Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.
- Price $150.99
- Pricier than about 91% of the 9,945 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
1 more in the same range
Questions about this item
What cable diameter does the 1.30 mm aperture accept?
The 1.30 mm aperture fits conductors up to that diameter, matching typical Cat7 solid-core wires.
What tool and contact type are required for the three-pronged contacts?
Use a standard RJ45 crimp tool; the three-pronged contacts pierce the insulation on each conductor when fully seated.
Does the brass shell connect to the cable shield for Cat7 grounding?
Yes, the brass shell provides the shield connection when the cable’s foil and drain wire are folded back under the crimp ferrule.
More in Ethernet & LAN Cables
Similar items
Monoprice Inc. 140885 Flat Cat6 Network Ethernet Cable 10 ft Black 30AWG 550MHz
- Networking Patch Ca…
- 10 ft (3.05 m)
Monoprice 142959 Cat8 network ethernet cable 250 ft blue
- Bulk Networking Cab…
- 250 ft (76.2 m)
Nippon Labs 60CAT6A-6WT Cat6A network ethernet cable 6 ft white 24 AWG
- 6A
- RJ45
Petra CAT6 UTP Solid Riser CMR Cable 1000ft Yellow
- Yellow
- Sold as 1 Each.
Cables To Go 31360 Cat6 network ethernet cable 75 ft Gray
- RJ45
- RJ45
Black Box Corporation EYN864A-PB-1000 network ethernet cable 1000 ft violet
- Others
- Violet






