Enfain OM3 ST-ST Duplex Multimode Fibre Optic Cable Aqua Blue 20m
OM3 multimode duplex patch cord with ST connectors, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss, 20 m length
- Supports 10G, 40G and 1G links with OM3 10-gigabit core
- Low signal loss at 0.2 dB typical and 0.3 dB maximum insertion loss
- Strong return loss above 38 dB for clean transmission
- Durable 3.0 mm PVC jacket rated for 1000 mating cycles
- Operates reliably from -20 °C to +60 °C with 330 mm bend radius
Enfain OM3 ST-ST Duplex Cable
The Enfain OM3 ST-ST duplex multimode fibre optic cable is built for 10G gigabit links across switches, servers and data-centre equipment. It suits installers who need a ready-made 20m patch cord with ceramic ferrules and a 3.0mm PVC jacket.
OM3 10-gigabit core at 850nm
The single specification that decides fit is the OM3 10-gigabit core operating at 850nm. It delivers 10G performance with typical insertion loss of .2dB and maximum insertion loss of .3dB, while return loss exceeds 38dB. The duplex ST-ST connectors match legacy ST ports on older switches and patch panels.
Thermals noise and power draw
Passive fibre carries no electrical power, so the cable generates no heat and produces zero noise. The 3.0mm jacket withstands a 330mm bending radius and is rated for 1000 insertion cycles across an operating range of -20°C to +60°C.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $42.99
- Pricier than about 61% of the 812 comparable items (median $29.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
What does the OM3 10-gigabit core rating mean for actual link speed?
The OM3 core is rated for 10 GbE transmission at 850 nm, so the cable will carry a 10 GbE signal across its 20 metre length.
What does the duplex ST connector interface limit in practice?
Duplex ST connectors provide two fibres for transmit and receive, locking with a bayonet twist, and the OM3 core caps the link at 10 GbE over multimode distances.
What physical space and bend radius does the 3.0 mm jacket need?
The 3.0 mm PVC jacket requires a minimum bend radius of 330 mm and an operating temperature range of -20 °C to +60 °C for reliable installation.
More in Fiber Optic Patch Cables
Similar items
Tripp Lite N820-10M 32.81 ft 10Gb Aqua Duplex Multimode 50/125 Fibre Optic Cable
- Fiber Optic
- Aqua
sakose AQ-LL25 Aqua 25 m 10 Gbps OM3 LC/LC 50/125 fibre optic cable
- Connector A: 1 - Fi…
- Aqua
Black Box Corporation EFN310-002M-LCLC Single-Mode 9-Micron Duplex Fibre Optic Cable LC-LC PVC 2-m 6.5-ft
- Others
- Yellow
Pannet FZ2ERLNLNSNM001 fibre optic cable 2-fiber OM4 10 GbE LC duplex 1.6mm riser
- Others
Belkin F2F202LL-15M 49 ft fibre optic cable
- Fiber Optic
- Orange










