We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fibre cable with LC male connectors at both ends

sakose

sakose AQ-LL25 Aqua 25 m 10 Gbps OM3 LC/LC 50/125 fibre optic cable

SKU CH-ZD4E-5PS0F

A 25 metre OM3 multimode cable with LC male connectors at both ends, rated for 10 Gbit/s at 850 nm

  • Rated speedMaximum Data Transfer Rate: 10 Gbit/s Cable Rating: Fiber -
  • Connector count2
  • Connector detailsConnector A: 1 - Fiber Optic LC Male Connector B: 1 - Fiber
  • Connector genderMale to Male
  • Product colorAqua
  • Overall length82.02 ft (25 m)
  • 25 metre reach for extended campus or data-centre runs
  • 10 Gbps OM3 multimode supports high-speed 10 Gigabit links
  • LC male-to-male connectors for direct patch-panel or transceiver mating
  • 50/125 µm core/cladding matches standard OM3 infrastructure
  • Aqua jacket identifies OM3 cable at a glance

25-metre OM3 LC duplex fibre cable

This 25 metre aqua cable carries two LC male connectors in a duplex arrangement. It is built for 10 Gbit/s multimode links in broadband, telecom and datacom environments. The OM3 50/125 µm fibre operates at an 850 nm wavelength. Installers needing a ready-terminated patch lead for short-reach 10 GbE runs will find it a direct fit.

OM3 50/125 µm capacity at 10 Gbps

The OM3 classification supports 10 Gbit/s Ethernet up to the full 25 metre length without exceeding the standard modal bandwidth budget. At 850 nm the cable delivers the rated headroom for typical data-centre and campus backbone spans. Runs longer than 25 metres or speeds beyond 10 Gbit/s would exceed the OM3 distance specification and require a higher-grade fibre.

LC duplex interface practical limits

The LC duplex connectors mate with standard SFP+ or QSFP+ transceiver ports using the 50/125 µm multimode interface. Insertion loss and return loss remain within IEC limits for the 10 Gbit/s rating at 850 nm. The link cannot support single-mode transceivers, nor can it reach the distance or bandwidth of OM4 or OM5 grades at the same speed.

How it compares

Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.

Price $42.99
Pricier than about 61% of the 812 comparable items (median $29.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSAKOSE
Model nameAQ-LL25
Product colorAqua
Performance
Rated speedMaximum Data Transfer Rate: 10 Gbit/s Cable Rating: Fiber - 10 Gbit/s
Ports & slots
Connector count2
Connector detailsConnector A: 1 - Fiber Optic LC Male Connector B: 1 - Fiber Optic LC Male
Connector genderMale to Male
Size & build
Overall length82.02 ft (25 m)

Questions about this item

Will the LC connectors on this 25 m OM3 cable fit the SFP+ modules I already use?

Yes, both ends are LC male connectors, the standard interface for SFP+ transceivers in 10 Gbps multimode links.

How can I verify the link is running at 10 Gbps after I connect it?

Check the switch or NIC port statistics — they should show a 10 Gbit/s negotiated speed with no CRC errors on the 850 nm wavelength.

Does the aqua jacket come pre-terminated with both LC plugs, or do I need to buy connectors separately?

The cable ships with two LC male connectors already fitted, one on each end, so no extra termination parts are required.

More in Fiber Optic Patch Cables

Similar items