Enfain USB 2.0 Printer Cable Transparent Brown 1.5m
A transparent brown USB 2.0 printer cable with all-copper 24+28 AWG conductors, 96-braid shielding and 1.5 m length for reliable data transfer
- Reliable data transfer with real USB 2.0 and backward compatibility to USB 1.1
- Durable construction using all-copper 24+28 AWG conductors with 96-strand braiding
- Flexible 1.5 metre length suits desktop or peripheral placement
- Transparent brown jacket made from environmental protection materials
- Lightweight 60 gram cable reduces strain on ports
Enfain USB 2.0 Printer Cable Transparent Brown
This 1.5 metre USB 2.0 cable connects printers, scanners and similar peripherals to a host computer. It uses a USB Type-A plug at one end and a USB Type-B plug at the other. The transparent brown jacket identifies the cable at a glance. It is supplied new and ready for immediate use.
Build Quality and Connectors
The conductors are specified as 24+28 AWG all-copper cores inside a 5.0 mm jacket with 96 braid strands and aluminium foil shielding. The braided construction resists kinking during daily routing behind desks. Standard USB-A and USB-B moulded ends fit the vast majority of legacy and current printer ports without adapters.
Thermals Noise and Power Draw
As a passive copper cable it generates no audible noise and adds negligible heat to the workspace. Power delivery follows the USB 2.0 specification, drawing only what the connected device negotiates. No external power supply or active electronics are required for normal operation.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 55% of the 15,227 comparable items (median $14.99).
Specifications
No published specifications for this item yet.
Other versions of this model
3 more in the same range
Questions about this item
What data rate does the USB 2.0 interface cap at in practice?
The cable supports real USB 2.0 transmission and is fully compatible with USB 1.1 and USB 2.0 modes.
What connector types are needed for this cable to fit a typical printer?
It uses a USB 2.0 AM to B male cable design, matching standard printer ports.
How is the cable installed, and which step do users often get wrong?
Plug the Type-A end into the host and the Type-B end into the printer; ensure the Type-B connector is fully seated, as a loose fit causes connection drops.
More in USB Cords & Extension Cables
Similar items
ESTONE PQ001 USB4 Gen 3x2 Cable 5 ft Copper 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE TJ-A323 USB4 cable 6.6ft 40Gbps 100W 8K@60Hz
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Jansicotek USB4 usb cable 3.3Ft 40Gbps 240W 8K@60Hz
- USB C to USB C
- USB4








