STARTECH PEXUSB3S25 2 Port PCI Express USB 3.0 Expansion Card
- 2x USB Ports
- USB 3.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds four SAS 2.0 ports — one internal SFF-8087 and one external SFF-8088 — to connect up to 24 SAS or SATA drives via a PCIe 2.0 x4 slot
The eshinreal add-on card provides four SAS 2.0 ports running at 6 Gbps each, split between one internal SFF-8087 connector and one external SFF-8088 connector. It targets server builders who need to attach additional SAS or SATA drives without a dedicated RAID controller. The SAS2X36 expander chip handles drive enumeration so the host sees every attached device.
The card sits on a PCIe 2.0 x4 link that delivers 2 Gbps per lane, setting a ceiling for continuous data movement across all 24 supported drives. Because the SAS2X36 operates as an expander rather than a RAID engine, every drive appears independently to the operating system and the host controller manages the workload. This architecture suits backup targets and archival arrays where steady streaming matters more than burst speed.
Both full-height and half-height brackets ship in the box so the card fits dense rack chassis without blocking adjacent slots. The SAS2X36 expander draws modest power from the PCIe slot and runs passively, relying on chassis airflow rather than an onboard fan. No auxiliary power connector is present, keeping cable routing simple in tightly packed enclosures.
Measured against everything we stock in PCIe Expansion Cards, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Controller Card |
The card is a passive controller with no onboard fan; the SAS2X36 expander draws modest power, so heat and noise depend on chassis airflow rather than the card itself.
You need a free PCIe 2.0 x4 slot, Mini-SAS SFF-8087 cables for internal drives and Mini-SAS SFF-8088 cables for external enclosures.
The expander supports SAS 2.0 at 6 Gbps and will negotiate down to 3 Gbps with an older HBA, so existing 3 Gbps controllers remain compatible.
More in PCIe Expansion Cards
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?