We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort 2.0 cable with male connectors on both ends, 3.3 ft long

ESTONE

ESTONE TJ-A114 DisplayPort 2.0 cable 3.3 ft 80Gbps 16K@60Hz 4K@165Hz

SKU CH-4M3V-PMRBE

DisplayPort 2.0 cable carries 80 Gbps for 16K at 60 Hz or 4K at 165 Hz over 3.3 ft

  • Refresh frequency16K@60 Hz(With DSC)/10K@60 Hz/8K@60 Hz/4K@165 Hz/4K@144 Hz(N
  • Cable length3.3 ft (1.01 m)
  • Connector count1
  • Source connector1 x DisplayPort 2.0
  • Destination connector1 x DisplayPort 2.0
  • Connector detailsDisplayPort to DisplayPort 2.0 Cable 16K@60 Hz
  • Supports 16K at 60 Hz resolution for ultra-high-definition viewing
  • Delivers up to 80 Gbps bandwidth for stable, high-speed transmission
  • Handles 4K at 165 Hz refresh rate for smooth gaming motion
  • Backwards compatible with DisplayPort 1.4 and 1.2 devices
  • Features Dynamic HDR with 4:4:4 colour format for accurate colour reproduction

16K DisplayPort 2.0 cable 3.3 ft

The ESTONE TJ-A114 is a male-to-male DisplayPort 2.0 cable rated for up to 80 Gbps bandwidth. It supports 16K at 60 Hz with Display Stream Compression and 4K at 165 Hz without compression. The 3.3 ft length suits desktop monitors or projectors placed close to the source. Dynamic HDR and HDCP 2.2 are included for protected high-dynamic-range content.

Gamers and creators with DP 2.0 sources

This cable matches graphics cards or laptops that output DisplayPort 2.0 and monitors that accept 4K at 165 Hz or 8K at 60 Hz. It is also backward compatible with DisplayPort 1.4 and 1.2 displays. Buyers whose hardware only provides HDMI or USB-C video outputs cannot use this cable. Users needing a cable run longer than 3.3 ft should look at a different length.

80 Gbps bandwidth ceiling

The single specification that decides fit is the 80 Gbps maximum bandwidth. It enables 16K at 60 Hz with compression and 4K at 165 Hz uncompressed. If the source and display both support DisplayPort 2.0 UHBR 20, this cable will not limit the link. If either device tops out at HBR3, the extra headroom goes unused but the cable still works.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 90% of the 3,804 comparable items (median $15.99).
Refresh frequency 16K@60 Hz(With DSC)/10K@60 Hz/8K@60 Hz/4K@165 Hz/4K@144 Hz(No Compression).
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameESTONE
Model nameTJ-A114
Product typeDisplayPort Cable
Product colorBlack
Display
Refresh frequency16K@60 Hz(With DSC)/10K@60 Hz/8K@60 Hz/4K@165 Hz/4K@144 Hz(No Compression).
Ports & slots
Connector count1
Source connector1 x DisplayPort 2.0
Destination connector1 x DisplayPort 2.0
Connector detailsDisplayPort to DisplayPort 2.0 Cable 16K@60 Hz
Connector genderMale to Male
Size & build
Overall length3.3 ft (1.01 m)
Cable length3.3 ft (1.01 m)

Other versions of this model

5 more in the same range

Questions about this item

Does the 80 Gbps DisplayPort 2.0 link generate noticeable heat or draw extra power during all-day 16K@60Hz use?

The cable is passive copper with no active electronics, so it produces no measurable heat and draws no power beyond the negligible signal current from the source device.

What must my PC and monitor already have to run 4K@165Hz over this 3.3 ft DisplayPort 2.0 cable?

Both the graphics card and the display need a DisplayPort 2.0 port that supports UHBR20 and DSC; the cable itself is backward compatible with DP 1.4 and 1.2 but 4K@165Hz requires the 2.0 link.

Will this male-to-male DisplayPort 2.0 cable work with my older DP 1.4 monitor at 4K@144Hz without compression?

Yes, the cable is backward compatible with DP 1.4 and 1.2, so it will carry 4K@144Hz uncompressed on a DP 1.4 source and display.

More in DisplayPort Monitor Cables

Similar items