ESTONE LJ-DP8K DisplayPort 1.4 Cable 6.6 ft 8K@60Hz 4K@144Hz 2K@240Hz HBR3 32.4Gbps
- 6.6 ft (2.01 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 3.3 ft DisplayPort 2.0 cable carrying 80 Gbps for 16K at 60 Hz, 8K at 120 Hz and 4K at 240 Hz
This DisplayPort 2.0 cable carries up to 80 Gbps between a source and a display. Male-to-male connectors and a braided jacket make it a straight replacement for shorter or older cables. It is aimed at owners of 8K or 16K monitors and high-refresh 4K panels who need the full UHBR10 link.
Builders who need more than one 16K stream or who require the 20-pin power line for adapter dongles should look at something else. The cable is backwards compatible with DP 1.4 and 1.2, so legacy screens still work, but multi-stream 16K is not supported.
The single specification that decides fit is the certified 80 Gbps UHBR10 rate. If your graphics card and monitor both negotiate UHBR10 you get 16K 60 Hz, 8K 120 Hz or 4K 240 Hz without compression; if either end caps at HBR3 the link drops to lower modes.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ESTONE |
| Model name | TJ-A285 |
| Product type | DisplayPort Cable |
| Product color | Green |
| Performance | |
| Rated speed | Test Value |
| Display | |
| Refresh frequency | 16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort2.0 |
| Destination connector | 1 x DisplayPort2.0 |
| Connector details | DisplayPort to DisplayPort 2.0 Cable 16K@60 Hz |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 3.3 ft (1.01 m) |
| Cable length | 3.3 ft (1.01 m) |
| Cable shielding | Triple-shielded |
| Conductor type | Solid Copper Conductor |
| Build details | Test123 |
| Compatibility | |
| Supported platforms | Works with Windows Vista |
Other versions of this model
The cable has DisplayPort 2.0 male connectors on both ends and is backwards compatible with DP 1.4 and DP 1.2 ports, so it will work if either device has an older DisplayPort version.
Yes, the cable is backwards compatible with DP 1.4 and DP 1.2, so it will connect a DP 2.0 source to a DP 1.4 display at the monitor's supported resolution and refresh rate.
Check your GPU control panel or monitor OSD to confirm the active resolution shows 15360×8640 at 60 Hz with HDR enabled, which indicates the full 80 Gbps link is operating correctly.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?