ESTONE TJ-A055 USB-C to DisplayPort 1.4 cable 6.6 ft 8K 60Hz 4K 144Hz 32.4Gbps
- 6.6 ft (2.01 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 3.3 ft DisplayPort 2.0 cable supporting 80 Gbps bandwidth, 16K at 60 Hz, 8K at 120 Hz and 4K at 240 Hz with HDR, DSC and adaptive-sync compatibility
The ESTONE TJ-A285 is a DisplayPort 2.0 cable built for owners of 16K or high-refresh 4K displays. It carries 80 Gbps bandwidth and supports HDR, DSC 1.2a, HDCP 2.2 and DPCP 1.0. The 3.3 ft male-to-male link is backward compatible with DP 1.4 and 1.2 hardware.
Plug the male DisplayPort 2.0 connectors into matching ports on the graphics card and monitor; the 20-pin is disabled so no power feeds through the cable. Ensure both source and sink actually support the target refresh rate, otherwise the link will fall back to a lower mode. The triple-shielded solid-copper construction resists interference but offers no latch release button.
The standard tops out at 80 Gbps using UHBR10, enabling 16K at 60 Hz or 4K at 240 Hz with DSC compression. Without host and panel support for UHBR10 the cable operates at legacy HBR3 speeds. Cable length beyond 3.3 ft may require active signal conditioning to keep the full 80 Gbps rate.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ESTONE |
| Model name | TJ-A285 |
| Product type | DisplayPort Cable |
| Product color | Green |
| Performance | |
| Rated speed | Test Value |
| Display | |
| Refresh frequency | 16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort2.0 |
| Destination connector | 1 x DisplayPort2.0 |
| Connector details | DisplayPort to DisplayPort 2.0 Cable 16K@60 Hz |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 3.3 ft (1.01 m) |
| Cable length | 3.3 ft (1.01 m) |
| Cable shielding | Triple-shielded |
| Conductor type | Solid Copper Conductor |
| Build details | Test123 |
| Compatibility | |
| Supported platforms | Works with Windows Vista |
Other versions of this model
Check your GPU control panel or monitor OSD to confirm the active resolution reads 16K at 60 Hz and that HDR or DSC 1.2a is enabled.
The box contains the 3.3 ft green DisplayPort 2.0 male-to-male cable only; no separate adapters or power supplies are needed.
The single 3.3 ft DisplayPort 2.0 model rated for 80 Gbps supports 4K@240Hz along with 16K@60Hz and 2K@360Hz.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?