We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold PLA+ filament spools, each 1 kg, 1.75 mm diameter

eSUN

eSUN PLA+ Filament 1.75 mm Gold 10 kg (10 × 1 kg)

SKU CH-FH1D-XMQKX

Ten 1 kg spools of gold PLA+ filament with ±0.03 mm tolerance for high-speed FDM printing

  • Diameter1.75 mm
  • Product colorGold
  • Main materialPLA
  • Compatible systemsFor All FDM 3D Printer

Color Gold

Show 7 more
  • Cost-effective bulk pack for print farms and large projects
  • Enhanced PLA+ strength and toughness reduce breakage during printing
  • Consistent performance at high speeds on popular high-speed printers
  • Tangle-free winding and tight tolerance prevent nozzle clogs
  • ±0.03 mm dimensional accuracy ensures stable, repeatable prints

Bulk PLA+ for print farms

This 10 kg bundle contains ten 1 kg spools of eSUN PLA+ filament in Gold. The material is an enhanced PLA with higher strength and toughness than standard PLA, suited for batch printing on any FDM 3D printer. Neat winding and colour consistency support continuous operation.

Print temperature range 210-230 °C

Recommended nozzle temperature is 215 °C with a bed temperature of 45-60 °C. Printing speed can reach 40-100 mm/s at 100 % fan speed. Low shrinkage and minimal warping keep dimensional tolerance at ±0.03 mm for stable feeding and fewer failed prints.

1.75 mm diameter with ±0.03 mm tolerance

Each spool provides 340-350 m of filament wound to prevent tangling or overlap. The tight tolerance and roundness ensure smooth, clog-free extrusion on high-speed printers such as Bambu Lab and AnkerMake models. Vacuum-sealed packaging with desiccant preserves quality during storage.

How it compares

Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.

Price $109.99
Pricier than about 90% of the 305 comparable items (median $27.99).

Specifications

Product
Brand nameeSUN
Product colorGold
Size & build
Main materialPLA
Diameter1.75 mm
Compatibility
Compatible systemsFor All FDM 3D Printer

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 1.75 mm spool on my printer and what step causes feeding problems?

Mount the spool so filament unwinds counter-clockwise, thread it through the guide tube, then push it into the extruder until you feel resistance; the step people skip is pre-heating the nozzle to 215 °C before the first insert, otherwise the cold end can jam.

What maintenance or replacement will the Gold PLA+ need later?

PLA+ absorbs moisture over time; store unused spools in the vacuum bag with desiccant and re-dry at low heat if prints start stringing, otherwise the filament itself is the only consumable.

What limit appears first during a long, high-speed print run?

The 230 °C ceiling on nozzle temperature caps sustained speed; pushing beyond it risks heat creep and clogs even though the filament tolerances are ±0.03 mm.

More in 3D Printer Filament

Similar items