We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A loose coil of Fire Engine Red PLA+ filament in a vacuum-sealed bag

eSUN

eSUN PLA+ Refilament 1.75mm 1kg Fire Engine Red

SKU CH-P1V4-P1N17

Spoolless PLA+ refill for FDM printers, 1.75 mm diameter with ±0.03 mm tolerance, prints at 210–230 °C on a 45–60 °C bed

  • Diameter1.75 mm
  • Product colorFire Engine Red
  • Main materialPLA+
  • Compatible systemsFor FDM 3D Printer
  • Product weight2.2 lb (1 kg)

Color Fire Engine Red

  • Spool-less design works with Bambu Lab and eSUN holders
  • PLA+ material gives higher strength and toughness than standard PLA
  • Tight ±0.03 mm tolerance prevents jams and improves layer adhesion
  • Vacuum-sealed bag with desiccant keeps filament dry and dust-free
  • Prints at 210-230 °C on most FDM printers

eSUN PLA+ Refilament spoolless coil

eSUN PLA+ Refilament is a 1.75 mm PLA+ filament supplied as a 1 kg spoolless coil for FDM 3D printers. It targets makers who already own a compatible spool holder and want a low-waste refill option. The material is an upgraded PLA with higher strength and toughness than standard PLA, suited for functional parts and general-purpose printing. Fire Engine Red is one of several available colours.

Thermal settings and printing behaviour

Recommended nozzle temperature is 210 to 230 °C with a bed temperature of 45 to 60 °C. Fan speed at 100 % and print speeds of 40 to 100 mm/s are advised. The filament is made from plant-based starch, produces low shrinkage and resists warping or cracking during normal indoor printing. Dimensional tolerance is held to ±0.03 mm for consistent feeding.

Sustained high-speed printing performance

The spoolless design is engineered for high-speed printers and maintains steady extrusion during long runs. Tight diameter control and good winding prevent tangling or overlap that could interrupt extended prints. Strong layer bonding supports durable parts printed continuously at speed. A vacuum-sealed bag with desiccant preserves filament quality between sessions.

How it compares

Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.

Price $16.99
Cheaper than about 90% of the 305 comparable items (median $27.99).

Specifications

Product
Brand nameeSUN
Product colorFire Engine Red
Size & build
Main materialPLA+
Diameter1.75 mm
Product weight2.2 lb (1 kg)
Compatibility
Compatible systemsFor FDM 3D Printer

Other versions of this model

5 more in the same range

Questions about this item

How do I load this spoolless PLA+ onto my printer, and what is the step people forget?

Mount the coil on a compatible spool holder such as the Bambu Lab or upcoming eSUN holder, then feed the 1.75 mm filament into the extruder; the step many miss is securing the free end before removing the vacuum seal so the coil does not spring loose and tangle.

What maintenance will this refill filament need over time?

Store unused portions in the original vacuum bag with the desiccant pack; if the material absorbs moisture after opening, dry it at 45-60 °C before printing again to restore the 210-230 °C extrusion quality.

What limit appears first during a long, high-speed print with this PLA+?

The 40-100 mm/s speed window combined with 100 % cooling fan is the practical ceiling; pushing beyond that typically causes layer adhesion loss or nozzle clogging before the +/- 0.03 mm diameter tolerance becomes an issue.

More in 3D Printer Filament

Similar items