STARTECH DP2DVI2 DisplayPort to DVI passive audio video converter 1080p 1920x1200
- 6 in (15.2 cm)
- 1x DVI-I female
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts HDMI ARC audio to optical output at 24-bit/192 kHz with a 6.6 ft cable, plug-and-play for soundbars and home theaters, PCM 2.0 only, no CEC
This HDMI ARC to optical audio converter extracts sound from a TV ARC port and sends it to a soundbar or home-theatre system through a Toslink cable. It supports 24-bit 192 KHz PCM 2.0 audio and includes a 6.6 FT cable for flexible placement. The unit is powered by USB and requires no drivers or software installation.
The adapter continuously extracts the digital audio stream from the ARC connection and converts it to optical without compression or added latency. Because it handles only PCM 2.0 streams, the data rate remains constant during long viewing sessions and the converter maintains the same 192 KHz sampling performance throughout.
The device draws its operating power from a standard USB port and has no internal fan, so it runs silently and adds negligible heat to an AV cabinet. With no moving parts and a low-power conversion chip, normal use produces no audible noise and minimal thermal load.
Measured against everything we stock in Video Signal Converters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ESWN DNXB |
| Product line | ESWN DNXB |
| Model name | ESWN DNXB |
| Part number | ESWN-ARC-Optical-0427-2M |
| Ports & slots | |
| Second connector | Optical |
| Connector type | HDMI ARC |
| In the box | |
| In the box | 1 |
The unit is powered through a USB connection and uses digital noise reduction to extract audio cleanly, so it stays cool during continuous use.
You need a TV with an HDMI ARC port, an optical cable for the soundbar, and a USB power source such as a TV USB port or charger.
No, the converter only accepts an HDMI ARC input and cannot extract audio from a standard HDMI or eARC port.
More in Video Signal Converters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?