We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six silver and red DC motors with propellers, battery holders, switches, wheels and wires in a kit

EUDAX EH-6SET-WCL 6-Set DC Motor Kit 3V-12V 25000 RPM

SKU CH-JPHY-4HTW4

Six brushed 130 motors with mounts, switches, battery holders and propellers for STEM builds

  • Parts included6 Set, false
  • Product colorSilver and Red
  • Key featuresPlastic, 27 mm x 38 mm, Silver and Red, Alkaline, true, STEM
  • Product weight5.9 oz
  • Size or dimensions12.3952 cm × 16.891 cm × 18.1102 cm
  • Six high-torque 130 motors run at up to 25000 RPM
  • Two power options included: AA holders and 9 V clips
  • Twelve pre-cut wires and heat-shrink tube speed up wiring
  • Eight plastic wheels and four shafts let you build rolling models
  • Six rocker switches give instant on-off control for every project

Ready-to-build motor kit for STEM projects

The EUDAX EH-6SET-WCL kit supplies six 130-size brushed DC motors rated for 3 V to 12 V operation with a no-load speed range of 9000 to 25000 RPM. Each motor has a 2.0 mm output shaft, 27 mm body diameter and 38 mm body length. The package adds rocker switches, 9 V clips, dual AA holders, mounting brackets, wiring, heat-shrink tube, plastic wheels, shafts and propellers.

Low-voltage operation keeps heat and noise minimal

Running the motors at the recommended 3 V from two AA cells limits current draw and keeps temperature rise low during typical classroom or hobby sessions. The small 130-frame brushed design runs quietly at reduced voltage, and the included battery holders and switches let builders power each unit independently without soldering.

Replaces loose motor-and-propeller assortments

Builders who previously sourced motors, propellers, shafts and wiring separately gain a single box with matched 2 mm shaft components and colour-coded leads. The jump is worth it when a project needs several identical drive units — such as multi-rotor or boat models — and consistent 10 mm shaft length, 60 mm propeller diameter and 30 mm wheel size simplify mechanical alignment. Not suited for applications requiring sustained 12 V high-speed runs or encoder feedback.

How it compares

Measured against everything we stock in DC Motor Kits & Gear Sets, at today’s prices. Recalculated every night.

Price $19.99
Pricier than about 60% of the 12 comparable items (median $19.49).

Specifications

Product
Brand nameEUDAX
Model numberEH-6SET-WCL
Product colorSilver and Red
Size & build
Product weight5.9 oz
Size or dimensions12.3952 cm × 16.891 cm × 18.1102 cm
In the box
Parts included6 Set, false

Questions about this item

How do I install the 2 mm output shaft into the 2 mm propeller aperture without forcing it?

Slide the 2.0 mm shaft into the 2 mm propeller aperture; the 10 mm shaft length and 7.5 mm output shaft height give enough engagement without binding.

Which parts will need replacement after repeated STEM builds?

The 130-size brushed motors wear their commutator brushes over time; propellers and 30 mm plastic wheels can crack on impact, and the 40 cm heat-shrink tubing is single-use.

At what point does sustained high-voltage use shorten motor life?

Running the 3 V–12 V motor continuously at 12 V pushes it toward the 25000 RPM limit and accelerates brush wear, so the maker recommends 3 V drive for longest service.

More in DC Motor Kits & Gear Sets

Similar items