We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small silver geared motor with D-shaped output shaft and encoder module

yahboom

yahboom 520 Motor 333RPM 12V 7.4V Geared Motor Part

SKU CH-0XKB-GMYV5

A 520-size geared DC motor delivering 333 RPM at 12 V or 7.4 V with a Hall encoder for speed feedback

  • Full metal gears resist heat and wear for durable operation
  • Carbon brush and pure copper rotor boost torque and extend motor life
  • Hardened D-shaped steel shaft improves coupling strength and impact resistance
  • Hall encoder provides precise speed and direction feedback for smart vehicles
  • Dual 12 V and 7.4 V ratings suit a range of DIY projects

Yahboom 520 Motor 333RPM

The Yahboom 520 is a 12V DC geared motor rated at 333 RPM, designed for hobbyists building DIY robots, smart vehicles or science experiments. Its Hall-effect encoder provides AB-phase pulses for precise speed and direction feedback. Makers who need closed-loop control for Mecanum-wheel platforms or balancing robots will find the encoder output essential.

Dual-voltage torque headroom

Operating at either 12V or 7.4V, the motor delivers high torque through a full metal gearbox that resists heat and wear under sustained loads. The pure copper rotor and carbon brushes keep resistance low for strong current handling. Builds requiring continuous stall torque beyond the gearbox rating or speeds far above 333 RPM will exceed the mechanical limits.

Encoder and shaft integration

The bundled Hall encoder disc and D-shaped hardened steel output shaft simplify mounting couplers and reading velocity data without extra sensors. Carbon brushes extend service life compared to copper brushes. Projects that lack a microcontroller capable of decoding quadrature pulses or that require a round output shaft will need additional adaptation.

How it compares

Measured against everything we stock in DC Motor Kits & Gear Sets, at today’s prices. Recalculated every night.

Price $27.99
Pricier than about 90% of the 12 comparable items (median $19.49).

Specifications

Processor
ProcessorOther

Questions about this item

Can I use the 520 motor with a 12 V or 7.4 V supply I already have?

The motor is rated for both 12 V and 7.4 V operation, so either supply voltage will work.

How do I confirm the Hall encoder is sending correct AB pulses after wiring?

Connect the encoder leads to a microcontroller, spin the shaft and watch for two square-wave channels that change state as the motor turns.

Does the package include mounting hardware or couplers for the D-shaped output shaft?

Only the geared motor with its D-shaped steel shaft is supplied; couplers, brackets and screws must be sourced separately.

More in DC Motor Kits & Gear Sets

Similar items