FANXIANG S501Q 512GB PCIe 3.0 x4 NVMe M.2 2280 internal SSD
- Internal SSD
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1 TB M.2 2280 NVMe SSD with PCIe 3.0 x4 reaching 3500 MB/s read and 2500 MB/s write for faster boots and loads
Capacity 1TB
The Fanxiang S501Q is a 1TB internal drive in the M.2 2280 form factor. It connects through a PCI-Express 3.0 x4 interface and uses 3D NAND QLC memory. The drive targets laptops, desktops and all-in-one systems that have an M.2 slot.
A graphite heat dissipation sticker is applied to the controller to manage temperatures without a bulky heatsink. The board measures 2.40mm in height and 22.00mm in width, so it fits tight laptop bays and low-profile desktop boards. Installation screws are included in the package.
Sequential reads reach up to 3500MBps and writes up to 2500MBps thanks to an SLC cache layer. The drive is rated for 320TB written and a 1,500,000-hour MTBF. It operates from 0°C to 70°C and draws no external power beyond the M.2 slot.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | FANXIANG |
| Product line | S501Q |
| Model name | S501Q |
| Part number | S501Q-1 TB |
| Total capacity | 1 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 3,500 MB/s |
| Sequential write speed | Up to 2,500 MB/s |
| Storage | |
| NAND flash type | QLC |
| Write endurance | 320 TB |
| Ports & slots | |
| Interface type | PCI-Express 3.0 x4 |
| Size & build | |
| Form factor | M.2 2280 |
| Heat sink | Without HeatSink |
| Overall height | 2.4 mm |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Product weight | 8g |
| In the box | |
| Included items | S501Q M.2 NVMe SSD x1, Screwdriver x1, Screw x1 |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -25 °C to 85 °C |
| More details | |
| Mean time between failures | 1,500,000 h |
Other versions of this model
The PCIe 3.0 x4 interface limits the S501Q to 3500 MB/s read and 2500 MB/s write.
It needs an M.2 2280 slot and 2.40 mm height clearance on the motherboard.
Insert the drive at an angle into the M.2 slot, then secure it with the included screw; the step often missed is fastening that screw.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?