XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1TB M.2 2280 NVMe drive with a heatsink, PCIe 4.0 x4 interface and up to 5000MB/s read speed for PS5 and PC
The FANXIANG S660 is a 1TB internal solid state drive built on PCIe 4.0 x4 and 3D NAND TLC. It targets gamers and PC builders who need fast sequential speeds for game installs and large file work. The drive also fits PlayStation 5 expansion slots with its included heatsink. ||
The drive uses the standard M.2 2280 layout and measures 9.50mm tall once the heatsink is fitted by hand. That height clears most laptop bays and desktop motherboards, though the manual step adds a minute to installation. The aluminium heatsink spreads heat across a larger surface so sustained writes stay within the 0°C to 70°C operating window. ||
Without a dedicated DRAM chip the controller leans on Host Memory Buffer and a dynamic SLC cache to hit 5000MB/s reads and 4500MB/s writes. The 700TBW rating and 2,000,000-hour MTBF show it can replace older PCIe 3.0 drives or smaller capacity sticks when the workload demands more throughput and endurance.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | FANXIANG |
| Model name | S660 |
| Part number | S660-1 TB |
| Total capacity | 1 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 5,000 MB/s |
| Sequential write speed | Up to 4,500 MB/s |
| Storage | |
| NAND flash type | 3D NAND TLC |
| Write endurance | 700 |
| Ports & slots | |
| Interface type | PCI-Express 4.0 x4 |
| Size & build | |
| Form factor | M.2 2280 |
| Heat sink | With HeatSink |
| Overall height | 9.5 mm |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Product weight | 30g |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -45 °C to 85 °C |
| More details | |
| Mean time between failures | 2,000,000 h |
The PCIe 4.0 x4 interface limits the S660 to a maximum sequential read of 5000MBps and a maximum sequential write of 4500MBps.
The drive measures 9.50mm tall with the heatsink fitted, so the M.2 slot must accommodate at least that height plus the PCB.
The heatsink ships separately; you must peel the thermal pad liner, press the pad onto the controller, then screw the heatsink down — skipping the liner removal leaves an air gap.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?