Fervit ATX 8P EPS 360 Degree Angled Power Adapter 2pcs
Pair of 12 V CPU power adapters with 360-degree angled connectors for tight chassis clearance
- Solves tight CPU power clearance in low-profile cases
- 360-degree angled header redirects cable from vertical to horizontal
- Includes one up-angled and one down-angled adapter for flexible routing
- Designed specifically for ATX 12 V EPS 8-pin CPU connectors only
- Not compatible with PCI-E graphics card power connectors
Purpose and fit
This Fervit adapter set re-routes an ATX 8-pin EPS cable from vertical to horizontal. It targets builders working in limited-height chassis where the CPU power header sits too close to the side panel or cooler for a straight connector to seat properly. The pair includes one up-angled and one down-angled unit so the cable can exit either direction.
Upgrade path
It replaces a stock straight EPS plug when clearance prevents a firm connection or forces a sharp bend that stresses the motherboard header. The jump is worth it whenever the case or air cooler leaves less room above the socket than a straight connector needs, yet the header itself remains a standard 12 V EPS socket.
Sustained behaviour
The adapters are passive mechanical couplers, so electrical performance matches the cable and PSU driving them. Under continuous load they add no resistance or heat beyond what the mated connectors already produce, and the 360-degree angled geometry maintains full pin engagement without intermittent contact caused by cable tension.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $16.99
- Cheaper than about 75% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Fervit |
Questions about this item
Does this 360-degree angled adapter fit standard ATX 8-pin EPS motherboard headers?
Yes, it connects to the standard 8-pin EPS male header on the motherboard and accepts the matching female cable connector.
How do I orient the up-angled and down-angled adapters during installation?
Choose the up-angled piece to route the cable upward or the down-angled piece to route it downward, matching your chassis clearance.
Will the adapter pins wear out if I reseat the CPU power cable several times?
The gold-plated contacts are rated for repeated mating cycles typical of PC builds and upgrades.
More in AC Adapters & Power Bricks
Similar items
Dell P2-12V5A-US-C-8S 12V 5A 60W power adapter with 8-way splitter
- USB C Charger
- 9 V





