Fervit Stackable USB 3.0 20-pin header to dual Type-A panel cable 50cm
Connects a motherboard 20-pin header to two USB 3.0 Type-A front-panel ports with screw-mount brackets over a 50 cm length
- Adds two front-panel USB 3.0 ports from one motherboard 20-pin header
- 50 cm cable reaches most chassis front panels cleanly
- Stackable design keeps the header free for other devices
- Dual Type-A sockets mount securely with two screw holes
- Direct 20-pin connection enables full USB 3.0 speeds without adapters
USB 3.0 front-panel adapter for desktop builds
This cable converts a single motherboard 20-pin header into two standard Type-A ports on a chassis front panel. It suits system integrators and DIY builders who need extra USB 3.0 connectivity without occupying rear I/O slots. The 50 cm length reaches most mid-tower front-panel cutouts.
Simple screw-mount installation with keyed header
The female panel end includes two screw holes for secure mounting in a standard front-panel opening. The 20-pin connector is keyed to prevent reversed insertion, so the only common mistake is forcing the header onto misaligned pins. No drivers or BIOS changes are required once the cable is seated.
Steady throughput for sustained transfers
The 3.0 link maintains full signalling rate during extended file copies or backups across both ports simultaneously. Because the two Type-A sockets share the single 20-pin channel, aggregate bandwidth divides when both ports are active, but the connection remains stable without thermal throttling or signal drop-out.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 55% of the 15,227 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | Fervit |
Questions about this item
How can I verify the cable is working after connecting it to the motherboard 20-pin header?
Plug a USB 3.0 device into each Type-A port; both should enumerate at 3.0 speeds and transfer data without errors.
What comes in the box and is anything else required for installation?
The cable assembly with dual Type-A panel ends and a single 20-pin header connector is included; you only need a free 20-pin USB 3.0 header on the motherboard and two screws for the panel mount.
Which version or capacity should I choose for my build?
This model provides two USB 3.0 Type-A ports from one 20-pin header at a fixed 50 cm length; choose it when you need exactly that port count and reach.
More in USB Cords & Extension Cables
Similar items
ESTONE PQ001 USB4 Gen 3x2 Cable 5 ft Copper 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE TJ-A323 USB4 cable 6.6ft 40Gbps 100W 8K@60Hz
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Jansicotek USB4 usb cable 3.3Ft 40Gbps 240W 8K@60Hz
- USB C to USB C
- USB4





