We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red Festo 5/3 solenoid valve 42 mm wide with LED indicator

Festo

Festo VSVA-B-P53U-D-D1-1R5L 5/3 Solenoid Valve 42 mm 24 V DC 1300 l/min

SKU CH-MYYK-287SE MPN VSVA-B-P53U-D-D1-1R5L

5/3 pressurised solenoid valve, 42 mm wide, 24 V DC, 1300 l/min flow, IP65 rated

  • Labor warranty1 Year
  • Product typeTest Equipment
  • Color and finishRed
  • Number of items1 pack
  • Sold asBox
  • Parts warranty3 Years
  • 5/3 pressurised valve with overlap lap for precise mid-position control
  • 1300 l/min optimised flow rate on concatenated sub-bases
  • 24 V DC coil consumes 1.6 W with ±10 % voltage tolerance
  • IP65 protection and LED status display suit harsh environments
  • ISO 5599-1 compliant 42 mm wide piston gate valve mounts in any position

5/3 Pneumatic Valve for Automated Systems

The Festo VSVA-B-P53U-D-D1-1R5L is a 5/3 solenoid valve designed for pneumatic control in automated machinery. Its pressurized centre position and overlap lap suit applications where the actuator must hold position with pressure maintained on both sides. Electrical actuation and a 24 V DC coil allow direct integration with PLC outputs or relay modules.

Upgrading from 3/2 or 5/2 Valves

A 5/3 valve replaces simpler 3/2 or 5/2 units when a centred, pressurized hold function is required instead of simple extend-retract motion. The jump is worth it when machine cycles demand a safe mid-stroke stop or when overlapping flow paths prevent pressure loss during changeover. The 1300 l/min optimized flow rate supports medium-sized actuators without oversizing the valve.

Integration into Pneumatic Circuits

The valve mounts on an individual sub-base with exhaust routed through the base and flow control available via a throttle plate. Internal pilot air supply simplifies tubing because no external pilot line is needed. IP65 rating and a 100 % duty cycle allow continuous operation in dusty or wet environments. Any mounting orientation is permitted, and the LED indicator shows signal status for faster troubleshooting.

How it compares

Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.

Price $209.99
Pricier than about 80% of the 5,006 comparable items (median $95.99).

Specifications

Product
Brand nameFESTO
Model nameVSVA-B-P53U-D-D1-1R5L
Product typeTest Equipment
Color and finishRed
In the box
Number of items1 pack

Questions about this item

What sub-base mounting pattern does the 42 mm wide VSVA valve require?

The valve conforms to ISO 5599-1 and mounts on an individual sub-base with exhaust routed through that sub-base.

How do you wire the 24 V DC coil and what pilot-air mistake should be avoided?

Connect 24 V DC within the ±10 % tolerance to the electrical connector; the pilot air supply is internal, so do not plumb an external pilot line.

Which wear items will need replacement after extended use on this 1300 l/min valve?

The soft-seal piston gate and the throttle plate used for flow control are the primary components that degrade over time.

More in Electrical Trade Tools & Kits

Similar items