We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP transceiver module with metal housing and simplex LC port

Ficer Technology Co., Ltd

Ficer Technology Co., Ltd BIDI SFP Transceiver 1.25G 10KM Tx1310nm Rx1490nm Commercial Temperature

SKU CH-54GF-W7E20

Bidirectional SFP transceiver delivers 1.25 Gbps over 10 km single-mode fibre using Tx 1310 nm and Rx 1490 nm wavelengths

  • Port count1000BASE-BX10-U
  • Product typeTransceiver
  • Fiber modeSingle-mode Optical Fiber
  • Transfer speed1.25 Gbit/s
  • Temperature range0° ~ 70 °C
  • 25 Gbps bidirectional throughput over 10 km single-mode fibre
  • Tx 1310 nm FP laser and Rx 1490 nm receiver for full-duplex on one strand
  • Hot-pluggable SFP MSA form factor compliant with INF-8074i for instant deployment
  • Digital diagnostic monitoring via SFF-8472 two-wire interface for real-time link health
  • Commercial temperature range 0 °C to 70 °C with single 3.3 V supply

BIDI SFP 1.25G 10KM Transceiver

This bidirectional SFP transceiver operates at 1.25 Gbps over single-mode fibre with Tx1310nm and Rx1490nm wavelengths. It uses a simplex LC connector and complies with IEEE 802.3 ah 1000BASE-BX10-U and INF-8074i SFP MSA standards. The module is hot-pluggable and coded for compatibility with Cisco, Juniper and other open switches. It requires a +3.3V power supply and includes a two-wire interface for SFF-8472 diagnostics.

10km Link Capacity and Temperature Range

The transceiver supports a link distance of 10km over single-mode fibre for Gigabit Ethernet and 1GFC Fibre Channel applications. It is rated for commercial temperature operation from 0°C to 70°C. This distance suits campus or metro access links but will not reach longer-haul requirements such as 20km, 40km or 80km spans. Buyers needing extended reach beyond 10km should select a higher-distance BIDI model.

Build Integration and Coding Requirements

The module fits any SFP slot that accepts the INF-8074i MSA form factor and provides a single +3.3V supply. It frees up a second fibre strand by using bidirectional wavelengths on a single core. Before deployment, the host equipment brand and model must be supplied so the correct vendor coding can be programmed. Without proper coding the transceiver will not link on locked platforms.

How it compares

Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.

Price $20.99
Cheaper than about 93% of the 1,471 comparable items (median $138.99).

Specifications

Product
Product typeTransceiver
Performance
Transfer speed1.25 Gbit/s
Connectivity
Fiber modeSingle-mode Optical Fiber
Ports & slots
Port count1000BASE-BX10-U
Environment & compliance
Temperature range0° ~ 70 °C

Questions about this item

Will this 1.25 Gbps SFP module link with an older 1 GbE switch port that uses a Tx1490nm / Rx1310nm transceiver?

Yes, the Tx1310nm / Rx1490nm wavelength pairing is the standard U-side match for a D-side module, so a 10 km single-mode link will establish at 1.25 Gbps.

How can I verify the module is operating correctly once it is seated in the switch?

The 2-wire SFF-8472 interface exposes real-time temperature, voltage, Tx bias current, Tx power and Rx power; read those registers via the switch CLI or management software to confirm they sit inside the 0–70 °C commercial range.

Does the package include a simplex LC patch cord or must I order one separately?

Only the transceiver itself is supplied; a simplex LC single-mode patch cord for the 10 km run must be purchased separately.

More in SFP & SFP+ Transceiver Modules

Similar items