We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 10.5 litre pneumatic oil extractor tank with hoses and brake fluid hose coiled on side

Firstinfo Tools Co., Ltd.

Firstinfo Tools Co., Ltd. 10.5 Liter Pneumatic Manual Oil Extractor with Brake Fluid Hose

SKU CH-S8QX-KAZMD

Pneumatic and manual 10.5 litre extractor removes engine oil, brake fluid, ATF and other non-corrosive fluids with four extension tubes and a 6.5 ft brake bleeding hose with check valve

  • Product typeEngine Oil Extractor
  • Extracts engine oil, brake fluid and ATF without location limits
  • 5 litre capacity handles large fluid changes in one session
  • Works pneumatically or manually with no spark or power source needed
  • Includes 2 metre brake bleeding hose with check valve to prevent backflow
  • Four nylon tubes reach the bottom of reservoirs for complete extraction

10.5 Litre Pneumatic Manual Oil Extractor

This extractor removes engine oil, brake fluid, ATF and other non-corrosive fluids from motorcycles, vehicles and aquariums. It operates using compressed air or a manual vacuum pump, requiring no electrical power. The 10.5 litre tank suits garage or outdoor use. It is designed for most domestic and import vehicles on the market.

Brake Bleeding Hose and Extension Tubes

A 6.5 foot brake bleeding hose with a check valve prevents backflow during bleeding and includes a universal rubber adapter for common brake fittings. Four nylon extension tubes in diameters of 3.5, 4.5, 5.3, 6.7, 7.8 and 9.8 millimetres reach the bottom of reservoirs. The main hose connects to smaller tubes for a combined two metre reach.

Operating Pressure and Temperature Limits

The unit works between 40 and 170 PSI (2.8 to 11.7 bar) with an average air consumption of 2 CFM through a 1/4 inch US quick connector. Fluid temperature range spans 1°C to 95°C (35°F to 200°F). A safety cup and fixing valve automatically cut off extraction, while three air outlets and a decompression valve allow quick pressure release.

How it compares

Measured against everything we stock in Custodial Supplies & Trash Liners, at today’s prices. Recalculated every night.

Price $94.99
Pricier than about 83% of the 1,313 comparable items (median $26.99).

Specifications

Product
Product typeEngine Oil Extractor

Questions about this item

What working pressure range does the pneumatic extractor accept?

The unit operates between 40 and 170 PSI, which is 2.8 to 11.7 bar.

What tube diameters are included for reaching the bottom of the reservoir?

Four nylon tubes are supplied: 7.8×9.8 mm, 5.3×6.7 mm, 4×6 mm and 3.5×4.5 mm; the largest can be joined to the smaller ones for a 2 m reach.

How do you switch from pneumatic to manual extraction without losing vacuum?

Close the air inlet, then use the decompression valve to release negative pressure before opening the tank; the check-valve air outlets prevent back-flow during the changeover.

More in Custodial Supplies & Trash Liners

Similar items