We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue sleeved PSU cable kit with 24-pin ATX, 8-pin EPS and two 8-pin PCIe connectors, 300 mm long

Formulamod Fm-NCK1-300 18AWG ATX 24P EPS 8P PCIe 8P Blue 300mm

SKU CH-BJ5K-683T4

A 300 mm sleeved extension kit with 24-pin ATX, 8-pin EPS and two 8-pin PCIe connectors in blue, using 18AWG wire and pre-bent 180° for tidy routing

  • Refresh frequency300 ± 10 mm
  • Rated speedPremium Sleeved & Customizable
  • Cable length300 mm
  • Team affiliation1 Piece
  • Connector detailsPCIe, ATX
  • Connector genderMale to Female
  • Complete kit with 24-pin ATX, 8-pin EPS and dual 8-pin PCIe
  • Thick 18AWG conductors deliver stable power to every component
  • High-density flexible sleeve protects wires while keeping routing clean
  • Pre-bent 180° design keeps cables neat after sharp turns
  • Heat-shrink-less construction removes bulk for easier cable management

Cable kit contents

The Formulamod Fm-NCK1-300 kit includes one 24-pin ATX cable, one 4+4-pin EPS cable and two 8-pin PCIe cables. Each cable measures 300 millimetres and uses 18AWG conductors wrapped in a high-density nylon sleeve. Cable combs are supplied for clean routing. The male-to-female connectors extend existing power-supply leads.

Capacity and headroom

Thick 18AWG wiring delivers ample current for mainstream desktop builds and typical graphics cards. The 300-millimetre length suits mid-tower cases but may fall short in larger chassis or when routing behind motherboard trays. Pre-bent 180-degree ends keep cables tidy only when the retention buckle faces the documented direction.

Upgrade path and fit

This set replaces stock sleeveless cables for builders who want a uniform blue appearance without full custom sleeving. It is not suited for systems requiring longer runs, additional EPS or PCIe connectors, or configurations where the buckle orientation contradicts the pre-bend design.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $34.99
Pricier than about 75% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameFormulamod
Model nameFm-NCK1-300
Product typePCIe, ATX
Product colorBlue
Performance
Rated speedPremium Sleeved & Customizable
Display
Refresh frequency300 ± 10 mm
Ports & slots
Connector detailsPCIe, ATX
Connector genderMale to Female
Size & build
Overall lengthMillimeters 300
Cable length300 mm
Cable shieldingPremium Sleeved & Customizable
Build detailsNylon or similar synthetic material
More details
Team affiliation1 Piece

Questions about this item

Will the 300 mm blue extensions reach cleanly from a bottom-mounted PSU to an older ATX 24-pin motherboard header?

Each cable measures 300 mm and uses 18 AWG wire inside a flexible sleeve, so the kit spans the distance from a floor-mounted supply to the 24-pin board connector without strain.

How can I confirm the pre-bent 180° routing is seated correctly after installation?

Align every connector so the latch tab faces the direction shown in the guide — ATX and EPS bends toward the tab, PCIe bends away — then verify all 24, 8 and 8-pin plugs click fully home.

Does the package include combs for the two PCIe 8-pin cables as well as the ATX and EPS leads?

Yes, the kit supplies one 24-pin ATX, one 4+4-pin EPS, two 8-pin PCIe cables and several combs to dress every wire in the set.

More in Internal PSU & Riser Cables

Similar items