STARTECH PAC1011410 10 ft power extension cord 14 AWG
- Cable Connectors
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 30 cm DC power extension with a 5.5×2.1 mm male-to-female connector, 18 AWG wire rated for 10 A at 12 V, and an inline on/off switch for convenient power control
This pair of 30 cm cords extends a 12 V DC supply using a standard 5.5 mm by 2.1 mm male-to-female connector. Each cable is built from 18 AWG wire rated for 10 A at 12 V. They suit installers and hobbyists who need a quick way to add reach and on-off control to CCTV cameras, LED strips or similar low-voltage devices.
The integrated switch sits along the cable so power can be cut without unplugging the barrel jack. This reduces wear on device ports and speeds up testing or temporary shutdowns during installation. No cutting, soldering or extra tools are required — just connect the male end to the supply and the female end to the load.
Installation is straightforward: verify the jack measures 5.5 mm outer and 2.1 mm inner diameter, then push both connectors until seated. The 300 mm length limits routing flexibility in larger enclosures, and the 10 A rating means the cords must not be used on loads that exceed this current at 12 V.
Measured against everything we stock in AC Extension Cords, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Gytovvvz |
| Product type | Others |
| Ports & slots | |
| Connector details | 5.5 × 2.1, Male-to-Female |
| Connector gender | Male to Female |
| Size & build | |
| Overall length | 300 mm |
| Cable shielding | With Switch |
The switch is rated for the cable’s 10 A at 12 V load; normal daily use stays well within that rating, so no scheduled replacement is needed.
The 18 AWG conductors and the inline switch are both specified for 10 A at 12 V, so the cable’s own rating is the first limit reached under sustained load.
At or below the 10 A, 12 V rating the 18 AWG wire and switch run cool; only loads approaching the maximum rating produce detectable warmth.
More in AC Extension Cords
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?