We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided 13-inch cable with one 4-pin PWM plug branching to five fan headers

HANNORD

HANNORD 4-Pin PWM 1-to-5 Fan Splitter Cable 13 inch Black

SKU CH-R6YK-KC93K

A 13-inch black PWM splitter connects one motherboard header to five 4-pin or 3-pin case fans

  • Cable length13 in (33 cm)
  • First connector4-Pin PWM Fan Power Supply Cable
  • Second connectorInternal Motherboard Fan Power Extension Cable
  • Connector count6
  • Conductor typeDesktop, Atx, Computer Case, PC Case, Computer, Desktop Comp
  • Product typeOthers

Style 1-Pack

  • Connect up to five fans from one motherboard header using the 1-to-5 splitter design
  • Control both 4-pin PWM and 3-pin voltage fans with a single cable
  • Keep the build tidy with 13-inch black sleeved braided wiring
  • Install instantly with plug-and-play 4-pin male connectors
  • Route cables freely thanks to the flexible extension length

Five-Fan PWM Hub for ATX Builds

This HANNORD splitter turns one motherboard 4-pin PWM header into five fan connections, letting a single header drive multiple case or CPU coolers. The 13-inch black sleeved cable reaches most ATX board fan headers without strain. It accepts both 4-pin PWM and 3-pin voltage-controlled fans, so mixed fan types can run from the same hub. The plug-and-play design needs no extra software or drivers.

Simple Plug-In With One Critical Step

Installation is straightforward: align the keyed 4-pin plug with the motherboard header and press firmly until seated, then attach up to five fan connectors to the hub. The only common issue is a loose header connection; if the splitter is not fully inserted the fans will not spin or report speed. The braided sleeve resists snagging on case edges, and the 13-inch length avoids tension on the motherboard header during cable routing.

Suits Multi-Fan ATX Cooling.

Builders adding several case fans to a desktop ATX system will find this hub a tidy way to consolidate power and PWM control. It is not designed for proprietary laptop fan headers, server backplane connectors, or any non-standard pinout. Users who need more than five fans per header, or who require per-fan voltage regulation separate from PWM, should look at a powered fan controller instead.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 92% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeOthers
Product colorBlack
Ports & slots
First connector4-Pin PWM Fan Power Supply Cable
Second connectorInternal Motherboard Fan Power Extension Cable
Connector count6
Size & build
Overall length11 in - 15 in
Cable length13 in (33 cm)
Conductor typeDesktop, Atx, Computer Case, PC Case, Computer, Desktop Computer

Other versions of this model

5 more in the same range

Questions about this item

How can I confirm the PWM signal is reaching all five fans after connecting the 13-inch splitter to the motherboard header?

Connect the 4-pin PWM end to a motherboard fan header, power on the system, and verify each attached fan spins and responds to speed changes in BIOS or fan-control software.

Which connectors and cables are included, and what must I supply myself?

The package provides a 13-inch black sleeved cable with one 4-pin PWM male plug and five 4-pin female sockets; you supply the 3-pin or 4-pin case fans to attach.

Should I choose the 11-inch, 13-inch or 15-inch length for a standard ATX case?

The 13-inch version spans typical motherboard-to-fan distances in ATX builds; pick 11-inch for tighter routing or 15-inch if fans sit farther from the header.

More in Internal PSU & Riser Cables

Similar items