We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat8 ethernet cable 3.3 ft S/FTP 26AWG gold RJ45 UV resistant

HANNORD

HANNORD Cat8 network ethernet cable 3.3 ft 26AWG S/FTP 40Gbps 2000MHz gold RJ45 UV resistant black

SKU CH-7G33-AAXNF

A 3.3 ft Cat8 patch cable with S/FTP shielding, 26 AWG conductors and gold-plated RJ45 connectors rated for 40 Gbps at 2000 MHz

  • Overall length3.3 ft (1.01 m)
  • Product colorBlack
  • 40 Gbps speed for demanding networks backed by 2000 MHz bandwidth
  • 26 AWG pure copper conductors give lower loss than thinner 32 AWG cables
  • S/FTP shielding with quadruple layers cuts EMI and RFI interference
  • UV-resistant PVC jacket rated for outdoor use resists ageing in sunlight
  • 50-micron gold-plated RJ45 contacts ensure reliable signal transfer at every connection

Cat8 3.3 ft S/FTP 40 Gbps cable

The HANNORD Cat8 patch cable delivers 40 Gbps throughput at 2000 MHz bandwidth over a 3.3 ft run. Shielded foiled twisted-pair construction with 26 AWG solid copper conductors suppresses EMI and crosstalk for stable links in gaming, streaming or server environments. Gold-plated RJ45 contacts rated at 50 micron ensure low-resistance connections. The UV-resistant PVC jacket is rated for indoor and outdoor installation.

Thermals noise and power draw

As a passive copper cable the assembly generates no heat, produces no audible noise and draws no power of its own. The quadruple shielding eliminates external interference without active components. Signal integrity is maintained entirely by the 26 AWG conductors and S/FTP geometry. No external power supply or cooling is required.

Upgrade path and when it matters

The cable replaces Cat5, Cat6 or Cat7 links where 25GBASE-T or 40GBASE-T speeds are now needed. The jump is worthwhile when switch ports, NICs or server backplanes support 25 Gbps or 40 Gbps signalling and the existing cabling limits throughput. For 1 Gbps or 10 Gbps endpoints the higher category provides no measurable benefit.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 90% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product colorBlack
Size & build
Overall length3.3 ft (1.01 m)

Questions about this item

How do I install the 3.3 ft Cat8 cable with its 26AWG thickness and gold RJ45 plugs, and what step do people often miss?

Route the 0.8 mm PVC jacket without sharp bends, then press each 50-micron gold RJ45 until the latch clicks; the step often missed is verifying the click on both ends to guarantee 2000 MHz shielding continuity.

What maintenance or replacement will the UV-resistant S/FTP Cat8 cable need later?

Inspect the black PVC jacket annually for cracks from sun exposure; replace the cable if the 26AWG copper conductors or gold-plated contacts show corrosion that could drop 40 Gbps throughput.

What limit appears first when the Cat8 cable runs sustained 40 Gbps traffic?

The 2000 MHz bandwidth ceiling is reached before the 26AWG conductors overheat, so aggregate throughput cannot exceed 40 Gbps even with the quadruple S/FTP shielding.

More in Ethernet & LAN Cables

Similar items