We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and blue VGA cable with 15-pin male connectors at both ends, 3.3 ft long

HANNORD

HANNORD VGA cable male to male 3.3 ft 15 pin 1080P

SKU CH-DAVJ-YF88A

A 3.3 ft male-to-male VGA cable with 15-pin connectors, ferrite cores and shielding supports up to 1080P resolution

  • Source connector1 x VGA
  • Destination connector1 x VGA
  • Connector detailsVGA to VGA
  • Connector genderMale to Male
  • Conductor typeStranded 28AWG Tinned Copper
  • Product typeMale to Male

Cable Length 10 Feet

  • Connects PCs to monitors with 15-pin male VGA ports
  • Supports 1920x1080P and lower resolutions including 1600x1200 UXGA
  • Dual ferrite cores reduce EMI and RFI signal interference
  • Molded strain relief and finger-tightened screws ensure durable secure fit
  • 3 ft stranded 28AWG tinned copper conductors with foil and braid shielding

Ready-to-use VGA link for legacy displays

This 3.3 ft HANNORD cable carries analogue video from any 15-pin VGA output to a monitor or projector. Male-to-male connectors with thumb screws lock the signal path in place. Stranded 28 AWG tinned copper conductors, foil-and-braid shielding and dual ferrite cores suppress EMI and RFI. The assembly supports 1080P Full HD and lower VESA modes.

Suits desktops, laptops

Buyers who need digital signalling such as DisplayPort or HDMI should look at a different cable type. The product cannot carry audio, so a separate audio lead is required for sound. It is also unsuitable for runs longer than the supplied length without an active extender.

Verify that both source

Check the graphics driver can output one of the listed resolutions: 800x600, 1024x768, 1600x1200 or 1920x1080. Ensure there is enough physical clearance for the moulded strain-relief hoods and thumb screws. No software or firmware update is needed on the cable itself.

How it compares

Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 60% of the 1,119 comparable items (median $10.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeMale to Male
Product colorBlack & Blue
Ports & slots
Source connector1 x VGA
Destination connector1 x VGA
Connector detailsVGA to VGA
Connector genderMale to Male
Size & build
Overall length3.3 ft (1.01 m)
Cable shieldingYes
Conductor typeStranded 28AWG Tinned Copper

Other versions of this model

4 more in the same range

Questions about this item

Does my computer need a 15-pin VGA output to use this cable?

Yes, the cable has 15-pin male connectors at both ends, so the source device must provide a matching VGA port.

Will this 3.3 ft cable carry a 1920 x 1080 signal from an older laptop to a newer monitor?

The cable supports resolutions up to 1920 x 1080, so it can transmit that signal between any VGA-equipped laptop and monitor.

How can I verify the link is running at 1080P after I connect it?

Check the display settings on the computer; they should show 1920 x 1080 as the active resolution if the cable is working correctly.

More in VGA Monitor Cables

Similar items