Hetai Tech 3-in-1 Micro USB OTG Adapter Cable 20cm black
A 20 cm Micro USB OTG adapter with a charge/OTG switch lets you connect two USB 2.0 peripherals such as a mouse, keyboard or flash drive to your phone or tablet
- Connection typeMicro USB to USB A
- Connect mouse and keyboard simultaneously via two USB 2.0 ports
- Charge phone while hub is powered using Micro USB female port
- Switch between OTG data and charging modes with hardware toggle
- Expand phone storage instantly by connecting flash drives directly
- Ultra-portable 20cm cable weighing only 33g for travel use
3-in-1 Micro USB OTG Adapter Cable 20cm
The Hetai Tech adapter adds a Micro USB female port and two USB 2.0 female ports to phones or tablets that support USB On-The-Go. It lets users attach a mouse, keyboard, flash drive, game controller or digital camera for PC-like file transfers and input. The 20cm black cable weighs 33g and is designed for portable use.
Installation and common issues
Plug the male Micro USB connector into the host device, then set the side switch to the desired mode. In the OTG position the hub enables data accessories but blocks charging through the Micro USB female port; in the Charge position the port supplies power to the hub while OTG data is disabled. Forgetting to flip the switch for the intended task is the typical setup mistake.
Capacity and headroom
The hub comfortably handles low-power peripherals such as mice, keyboards and flash drives simultaneously. It runs out of headroom when bus-powered devices like portable hard drives or high-current accessories exceed the host port's limited output, causing disconnects or unstable operation. The Micro USB female port is strictly for supplying power to the hub itself and cannot charge the connected phone or tablet.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 55% of the 15,227 comparable items (median $14.99).
Specifications
| Ports & slots | |
|---|---|
| Connection type | Micro USB to USB A |
Questions about this item
How can I confirm the OTG function is active after plugging the adapter into my Android phone?
Slide the switch to the OTG position; the micro-USB port stops charging the phone and the connected mouse, keyboard or flash drive should be recognised immediately.
What comes in the box and is any extra cable or power supply required?
Only the 20 cm black adapter cable weighing 33 g is supplied; no additional cable or power adapter is needed because the host device provides power in OTG mode.
Which version or capacity should I choose for connecting a USB 2.0 flash drive and a game controller simultaneously?
This single 3-in-1 model provides one micro-USB male, one micro-USB female and two USB 2.0 female ports, allowing both peripherals to work together when the switch is set to OTG.
More in USB Cords & Extension Cables
Similar items
ESTONE PQ001 USB4 Gen 3x2 Cable 5 ft Copper 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE TJ-A323 USB4 cable 6.6ft 40Gbps 100W 8K@60Hz
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Jansicotek USB4 usb cable 3.3Ft 40Gbps 240W 8K@60Hz
- USB C to USB C
- USB4





