Canon 5322B001 projector lamp 245 Watt for LV-7490 LV-8320
- 245 W
- 3,000 (Normal) - 5,…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A replacement lamp module with a 215W UHP bulb rated for 5,000 to 6,000 hours, supplied in its housing for direct installation
This new projector lamp module fits the Hitachi CP-X3030 and uses the manufacturer model number DT01431. It arrives as a fully assembled bulb and housing so you can install it immediately without handling a bare bulb. The unit is built for classrooms, meeting rooms and home cinemas that need a drop-in replacement.
The module contains a genuine Philips UHP bulb rated at 215W and is produced to ISO9001 quality standards. Every lamp is tested for beam performance, ignition, voltage, appearance, connections and run-time before it leaves the factory. The pre-assembled housing means no alignment tools or extra brackets are required during installation.
Replacing a dim or expired lamp restores the projector to its rated 5000 hours in normal mode or 6000 hours in economy mode. The jump is worth it when image brightness has faded, colour accuracy has drifted or the projector warns that the lamp is near end of life. Not suited for users who need a bare bulb only or a different wattage specification.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | HITACHI |
| Product type | UHP |
| Display | |
| Lamp lifespan | 5,000 (Normal) - 6,000 (Economy) Hrs. |
| Power | |
| Power rating | 215 W |
The lamp is a UHP type rated at 215 watts, which sets the projector's light output level; the interface is the proprietary module connector used by Hitachi CP-X3030 projectors.
The module is a complete bulb-and-housing assembly built to the exact DT01431 form factor, so it slides into the CP-X3030 lamp compartment and secures with the projector's original retaining screws.
Power off and unplug the projector, let it cool, remove the lamp cover, unscrew the old module, insert the new DT01431 unit, tighten its screws, replace the cover, then reset the lamp timer in the menu — the reset is the step most often forgotten.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?