Hitachi, Ltd. ED-A101 Projector Lamp 200W
A 200W replacement lamp module with Philips UHB bulb and housing, ready for easy installation in compatible Hitachi projectors, rated for 2,000 normal or 3,000 economy hours
- Power rating200 W
- Lamp lifespan2,000 (Normal) - 3,000 (Economy) Hrs.
- Product typeProjector Lamp
- Ready to install with pre-assembled bulb and housing
- Bright 200W UHB lamp for clear projection
- Up to 3,000 hours life in economy mode
- 2,000 hours normal use before replacement
- Built to ISO 9001 quality standards
Hitachi ED-A101 200W Projector Lamp
The Hitachi ED-A101 is a 200W replacement projector lamp module supplied with a new Philips UHB bulb pre-fitted in its housing. It is designed for users who need a direct, ready-to-install light source for compatible Hitachi projectors.
Thermal output and power draw
The lamp operates at a rated 200W, which determines its heat output and electrical demand during normal projection. No separate cooling specifications or acoustic figures are provided for this module.
Rated lamp life under sustained use
In normal operating mode the lamp is rated for 2,000 hours of service, while an economy mode extends the rating to 3,000 hours. These figures reflect continuous running time rather than a short burst.
How it compares
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
- Price $102.99
- Typical for this category: the median of 9,513 items is $99.99.
- Power rating 200 W
- Lower than about 60% of the 8,831 comparable items (median 215 W).
Specifications
| Product | |
|---|---|
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 (Normal) - 3,000 (Economy) Hrs. |
| Power | |
| Power rating | 200 W |
Questions about this item
How do I install the ED-A101 lamp module without damaging the connector pins?
Power off and unplug the projector, let it cool completely, remove the lamp cover screw, slide out the old module by its handle, align the new module's connector and housing rails, push firmly until seated, replace the cover and reset the lamp timer in the menu.
When should I replace the Philips UHB 200W bulb inside this housing?
Replace it after roughly 2000 hours in normal mode or 3000 hours in economy mode, or sooner if brightness drops noticeably or the projector warns that lamp life is exhausted.
What is the first limit reached during a long presentation with this 200W lamp?
The thermal protection circuit will shut the projector down if the cooling airflow is blocked or the ambient temperature gets too high, preventing the lamp from overheating.
More in Replacement Projector Bulbs
Similar items
Hitachi, Ltd. CP-TW2505 Projector Lamp DT01511 225W UHP 4500/6000 Hrs
- 225 W
- 4,500 (Normal) - 6,…
Acer America M420 projector lamp Osram P-VIP 140 - 215W
- 140–215 W
- 3,000 (Normal) - 4,…





