TRENDnet TK-207K 2-Port USB KVM Switch
- 1 x USB (Type A), 1…
- 2 x USB Keyboard/Mo…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects two computers to dual monitors with 4K60Hz HDMI and 4K120Hz DP, plus 13 ports including 10Gbps USB 3.2 and card readers
The Hitoor SW522 lets a laptop and a desktop share one HDMI and one DisplayPort monitor. A USB-C port with MST handles the laptop while a combined HDMI, DisplayPort and USB-A link serves the desktop. Push buttons and a wired remote switch the active system instantly.
The unit runs without internal fans, drawing power from an included DC 12 V adapter. LED indicators show the selected computer at a glance. No acoustic noise is generated during normal operation.
Two 10 Gbps USB 3.2 ports and two USB 3.0 ports serve keyboards, mice and fast storage. A data-only USB-C port, SD and microSD slots add further peripheral options. The USB-C port does not deliver power or video.
Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Model name | SW522 KVM Switch |
| Product type | HDMI+Displayport KVM Switch 2 Monitors 2 Computer |
| Graphics | |
| Monitor support | HDMI, Displayport |
| Ports & slots | |
| PC connections | HDMI, Displayport |
| Computer ports | 2 Ports |
| Monitor ports | HDMI + Displayport |
| USB support | With USB support |
| Power | |
| Power requirements | DC 12 V power adapter |
| Size & build | |
| Product dimensions | L141xW75xH38 mm |
| In the box | |
| In the box | KVM Switch*1; USB-A 3.0 cable*1, USB-C to C cable*1, external controller*1, DC 12 V power adapter*1 |
| More details | |
| Switching method | Push Buttons and Wired Controller |
| Status lights | Yes |
Connect the laptop to the USB-C MST input port using the supplied USB-C to C cable. Connect the desktop to the PC2 IN group using one USB-A 3.0 cable, one HDMI cable and one DisplayPort cable. Use the push buttons or the wired controller to switch between the two computers.
The HDMI and DisplayPort video cables to each computer, the USB-A 3.0 and USB-C to C cables linking the computers to the switch, and the DC 12V power adapter cable are the items most likely to need replacement after repeated connect and disconnect cycles.
The DisplayPort output is limited to 4K120Hz; any source signal above 120Hz at 4K will be capped at that rate by the switch.
More in KVM Switches & Rack Consoles
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?