We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HNZXIB RE-501 5L rotary evaporator set with chiller and vacuum pump

HNZXIB

HNZXIB RE-501 Rotary Evaporator 5L 220V/50Hz with Chiller DLSB10/10 and Vacuum Pump laboratory supply

SKU CH-QRD2-KTH6Z

A 5 L rotary evaporator with digital speed control to 120 r/min, a 1500 W water/oil bath, PTFE and fluoro rubber seals, and a double-backflow condenser.

  • Total capacity5L
  • Rated voltage220 V
  • Product typeRotary Evaporator
  • High evaporation efficiency from 5 L flask and 120 r/min rotation
  • Digital speed display gives precise 0-120 r/min control
  • PTFE and fluoro rubber seals resist corrosion
  • 1500 W bath with ±1 °C accuracy ensures stable heating
  • Complete set includes chiller DLSB10/10 and vacuum pump SHZ-D(III)2TAP

Complete Laboratory System

The HNZXIB RE-501 is a 5L rotary evaporator kit supplied with a SHZ-D(III)2TAP vacuum pump and a DLSB10/10 chiller. It provides a single integrated setup for solvent distillation, concentration and purification in chemistry and biology laboratories. The package arrives in a safety wooden crate and includes a one-year warranty on non-glass components.

Sustained Operation Performance

The 1500W water or oil bath maintains temperature accuracy within ±1°C during extended runs. A 40W motor delivers stepless speed regulation from 0 to 120 r/min with digital display feedback. The double backflow condenser and PTFE plus fluoro rubber seals sustain a vacuum degree of 0.098Mpa for continuous high recovery rates. Manual screw-rod lifting offers 150mm of travel for stable flask positioning over long periods.

Decisive Specification

The evaporating flask capacity is 5000ml paired with a 3L receiving flask, defining the maximum batch volume per run. The bath interior measures 28cm diameter by 17cm depth, limiting vessel size. Operation requires a 220V 50Hz supply. Buyers needing larger single-batch throughput or a different mains voltage cannot use this configuration.

How it compares

Measured against everything we stock in Lab Equipment & Supplies, at today’s prices. Recalculated every night.

Price $3,644.99
Pricier than about 90% of the 734 comparable items (median $60.99).

Specifications

Product
Total capacity5L
Product typeRotary Evaporator
Power
Rated voltage220 V

Questions about this item

How much motor power does the RE-501 draw during continuous all-day operation?

The motor is rated at 40W with stepless speed regulation from 0 to 120 r/min, so its electrical draw stays low even during extended runs.

What utilities must be on site before the RE-501 set can be commissioned?

You need a 220V/50Hz supply for the 1500W bath and pump, a water source for the DLSB10/10 chiller, and bench space for the 5L evaporating flask and 3L receiving flask.

Will the 5L evaporating flask and 3L receiving flask fit standard ground-glass joints on existing glassware?

Both flasks are high borosilicate with PTFE and fluoro rubber sealing, matching common joint dimensions used in laboratory distillation setups.

More in Lab Equipment & Supplies

Similar items