XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
250 GB M.2 2280 internal SSD with PCIe 3.0 x4 interface delivering up to 2100 MB/s read and 1300 MB/s write speeds
The HP EX900 is a 250GB internal solid state drive built on an M.2 2280 form factor with a PCI-Express 3.0 x4 interface. It uses 3D TLC NAND and an HP controller to deliver sequential reads up to 2100 MBps and writes up to 1300 MBps for consumer workloads.
Random read performance reaches 120,000 IOPS while random writes hit 105,000 IOPS, with read latency of 0.028 ms and write latency of 0.035 ms. Active power draw is 2.99W and idle consumption is 0.68W, supporting consistent throughput during extended sessions.
The drive upgrades systems limited by older storage interfaces when the motherboard provides an M.2 slot wired for PCIe 3.0 x4. A 100 TBW endurance rating and 2,000,000 hour MTBF indicate the jump is worthwhile for users needing higher sequential bandwidth and lower latency.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Product line | EX900 |
| Model name | 2YY43AA#ABC |
| Total capacity | 250 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 2,100 MB/s |
| Sequential write speed | Up to 1,300 MB/s |
| Random read (4K) | Up to 120,000 IOPS |
| Random write (4K) | Up to 105,000 IOPS |
| Read latency | 0.028 ms |
| Write latency | 0.035 ms |
| Storage | |
| NAND flash type | 3D TLC |
| Controller chip | HP |
| Ports & slots | |
| Interface type | PCI-Express 3.0 x4 |
| Power | |
| Idle power draw | 0.68 W |
| Active power draw | 2.99 W |
| Size & build | |
| Form factor | M.2 2280 |
| Overall height | 2.4 mm |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Product weight | 5.4g |
| Shipping weight | 0.08 kg |
| Package size | 173 × 97 × 20 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| Operating humidity range | 5-95% |
| Max shock tolerance | 100G / 6 msec |
| Vibration tolerance | 3.1 GRMS (2-500 Hz) |
| More details | |
| Mean time between failures | 2,000,000 h |
The drive uses the M.2 2280 form factor, which is 22 mm wide and 80 mm long. Most modern ultrabooks and desktops accept this size, but verify your motherboard or chassis clearance before buying.
Active power draw is 2.99 W and idle draw is 0.68 W, which is low for a PCIe 3.0 x4 NVMe SSD. Many motherboards include integrated thermal pads; if yours does not, a thin aftermarket pad is inexpensive and easy to add.
The endurance rating is 100 TBW (terabytes written). At 50 GB of writes per day, that equals roughly five years of service life.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?