HP ProLiant DL360 Gen9 1U 8-bay SFF 2× E5-2643 v3 3.4 GHz 16 GB DDR4 B140i
- 1U
- Rack
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1U rack server with dual Xeon E5-2620 v3 CPUs, 128GB DDR4, and two 500GB SATA drives
The HP ProLiant DL360 Gen9 fits two Xeon E5-2620 v3 processors and 128 GB of DDR4 into a single rack unit. Twelve cores per socket and hyper-threading give 24 logical threads for virtualisation hosts or database nodes. Redundant 500 W supplies keep the platform running through a single power failure.
The onboard B140i controller manages the two installed 500 GB 7.2 K SATA drives in RAID 0, 1, 5 or 10 without a separate card. Six additional 2.5-inch bays remain open for capacity growth, but only SATA media are supported by this controller. No operating system is included.
All 24 DIMM slots are populated to the processor-limited maximum of 128 GB, leaving no room for further RAM expansion without replacing modules. The dual 2.4 GHz six-core CPUs handle moderate multi-threaded workloads, yet heavier analytics or larger VM densities will hit the core and memory ceiling quickly.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Product line | ProLiant |
| Model name | Proliant DL360 G9 |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon E5 v3 |
| Chipset | Intel C610 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 128 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 128 GB |
| Memory slot count | 24 |
| Storage | |
| Installed SSD | No |
| Disk controller | B140i Software RAID |
| Drive interface | SATA |
| Supported RAID levels | RAID 0/1/5/10 |
| Optical drive | None |
| Graphics | |
| Video RAM | 16 MB |
| Graphics chip | Matrox G200 |
| Ports & slots | |
| Network ports | 4 x Ports |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
| Product weight | 63 lb (28.6 kg) |
| Software | |
| Operating system | No |
| More details | |
| Management controller | iLO Management (standard). |
Other versions of this model
The server has 24 DDR4 DIMM slots total, 12 per processor. With 128GB already installed at the E5-2620 v3 maximum, all slots are likely populated; further expansion requires replacing existing modules.
The B140i controller supports SATA drives only, so sustained write speed is capped by the 6Gbps SATA interface and the 7.2K RPM mechanical drives rather than the controller itself.
Dual 500W hot-swap power supplies share the load, keeping each unit below peak temperature; the 1U form factor uses high-speed fans that produce noticeable airflow noise under full CPU utilisation.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?