HP ProLiant DL360 Gen9 1U Rack Server E5-2620v3 2.4GHz 96GB 2x500GB SATA
- 1U
- Rack
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1U rack server with a 12-core Xeon at 2.3GHz, 48GB DDR4, and dual 500GB SATA drives on B140i RAID
Installed Memory Size 48GB
HDD 2 x 500GB
The HP ProLiant DL360 Gen9 is a 1U rack server built around a single Intel Xeon E5-2670 v3 twelve-core processor running at 2.3 GHz. It ships with 48 GB of DDR4 memory installed across 24 DIMM slots and includes two 500 GB 7.2 K SATA drives managed by the on-board B140i software RAID controller. Redundant hot-swap 500 W power supplies are fitted as standard.
This platform suits workloads that fit within 48 GB of DDR4 and can run on software RAID levels 0, 1, 5 or 10 over SATA. It is not for buyers who require a hardware RAID controller, who need more than two installed drives at purchase, or who must boot from a storage interface other than SATA.
The B140i controller provides RAID 0, 1, 5 and 10 for SATA drives only and does not support other drive interfaces. This single specification decides whether the server can meet the storage topology required by the deployment.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Product line | ProLiant |
| Model name | Proliant DL360 G9 |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon E5 v3 |
| Chipset | Intel C610 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 48 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 48 GB |
| Memory slot count | 24 |
| Storage | |
| Installed SSD | No |
| Disk controller | B140i Software RAID |
| Drive interface | SATA |
| Supported RAID levels | RAID 0/1/5/10 |
| Optical drive | None |
| Graphics | |
| Video RAM | 16 MB |
| Graphics chip | Matrox G200 |
| Ports & slots | |
| Network ports | 4 x Ports |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
| Product weight | 63 lb (28.6 kg) |
| Software | |
| Operating system | No |
| More details | |
| Management controller | iLO Management (standard). |
Other versions of this model
The server supports 24 DIMM slots when both processor sockets are populated. With one E5-2670 v3 installed, only the 12 slots for that processor are active.
The B140i is a SATA-only software RAID controller. It cannot address SAS drives; a hardware SAS RAID controller would be required for mixed drive types.
Enter the BIOS or iLO interface on boot. The system summary will show the G200 video device and list 48 GB of registered ECC DDR4 across the populated slots.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?