HP S700 2.5" 120GB SATA internal SSD 2DP97AA#ABC
- 2.5 in (6.35 cm)
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2.5-inch SATA internal SSD with 250 GB capacity and 3D TLC memory for faster boot and load times
Capacity 250GB
This 250GB internal solid state drive uses a 2.5-inch form factor and a SATA III interface. It is built with 3D TLC NAND and suits desktops or laptops that need a straightforward storage upgrade for everyday workloads.
The drive draws a maximum of 1.27W during write operations and 1.10W during reads, while idle consumption sits at 5mW. With no moving parts it runs silently and produces minimal heat inside the chassis.
Replacing a traditional hard disk with this SSD cuts boot and application load times thanks to sequential speeds up to 555 MBps read and 515 MBps write. The 145 TBW endurance rating and 2,000,000 hour MTBF make the switch worthwhile for general office, media and light creative work.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Product line | S700 |
| Model name | 2DP98AA#ABC |
| Total capacity | 250 GB |
| Product type | Internal Solid State Drive (SSD) |
| Performance | |
| Sequential read speed | Up to 555 MB/s |
| Sequential write speed | Up to 515 MB/s |
| Random read (4K) | Up to 55,000 IOPS |
| Random write (4K) | Up to 80,000 IOPS |
| Storage | |
| NAND flash type | 3D TLC |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 5mW |
| Active power draw | Max Read: 1.1 W Max Write: 1.27 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 6.7 mm |
| Overall width | 70 mm |
| Product depth | 100 mm |
| Product weight | 45.36g |
| Shipping weight | 0.07 kg |
| Package size | 147 × 117 × 18 mm |
| In the box | |
| Included items | SSD; Quick Start Guide; Warranty Statement; 4 Screws |
| More details | |
| Mean time between failures | 2,000,000 h |
Other versions of this model
Fit the drive into the 2.5" bay, connect the SATA data and power cables, then enable AHCI in BIOS so the OS can use TRIM and NCQ.
The drive is rated for 145 TBW and 2,000,000 hours MTBF; no scheduled maintenance is required, but replace it once SMART reports wear approaching the TBW limit.
Sequential write speed caps at 515 MB/s, and the SLC cache can fill, so prolonged large-file writes will throttle to the native TLC rate.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?