We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular PoE injector with front ports and label

HPE

HPE S3J26A 1-port 10G 60W 802.3bt PoE Injector network connector

SKU CH-R1NN-6CKMC MPN S3J26A

Delivers up to 60 W of 802.3bt power over a single 10 GbE port in a compact midspan form factor

  • Delivers up to 60 W over a single port
  • Supports 10 Gbps data throughput for high-speed links
  • Compliant with 802.3bt standard for broad device compatibility
  • Compact 2.5 in height fits tight mounting spaces
  • Lightweight 2.01 lb design simplifies installation

Single-Port 10G 60W PoE Injector

This HPE Aruba midspan injector delivers up to 60 W of power over a single 10 Gbps Ethernet link using the 802.3bt standard. It connects between a network switch and a powered device, removing the need for local AC outlets. The unit measures 7.2 inches wide, 2.5 inches high and 2.8 inches deep, weighing approximately 2.01 lb.

Installers needing one high-power 10G PoE link

It suits installers who need to power a single 802.3bt device such as an access point or camera over a 10 Gbps connection. It is not for deployments that require multiple powered ports from one unit, nor for links limited to 1 Gbps or lower power budgets. Teams needing rack-mount density or managed PoE control should consider a dedicated PoE switch instead.

60 W maximum output power

The 60 W ceiling determines which 802.3bt class 6 or class 8 devices can be supported. Verify that the attached device’s power draw stays within this limit before deployment.

How it compares

Measured against everything we stock in Network Adapters & RJ45 Plugs, at today’s prices. Recalculated every night.

Price $184.99
Pricier than about 90% of the 1,221 comparable items (median $19.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the HPE S3J26A 1-port 10G 60W 802.3bt PoE Injector and what step is often missed?

Connect the injector between the network switch and the powered device using the 10G data ports, then plug the unit into AC power; the step often missed is verifying the switch port is set to pass data only, not to negotiate PoE itself.

What maintenance or replacement will the HPE S3J26A 1-port 10G 60W 802.3bt PoE Injector need later?

The injector has no user-serviceable parts; plan to replace the entire unit if the 60 W output fails or if the AC inlet is damaged, and keep the 2.5 in by 7.2 in by 2.8 in footprint clear for airflow.

What limit appears first on the HPE S3J26A 1-port 10G 60W 802.3bt PoE Injector under sustained load?

The 60 W maximum output power is the first hard limit; once a connected device draws that amount the injector cannot supply more, regardless of cable length or ambient temperature within the rated range.

More in Network Adapters & RJ45 Plugs

Similar items