We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
M.2 2280 SSD with black graphene heatsink, 80 by 22 mm

HUADISK

HUADISK HYV1TBX3(XT) 1TB internal SSD

SKU CH-GGSA-R57SX

M.2 2280 internal SSD with 1 TB capacity, up to 1900 MB/s read and 1800 MB/s write, 600 TBW endurance and graphene heatsink

  • Total capacity1 TB
  • Sequential read speedUp to 1,900 MB/s
  • Sequential write speedUp to 1,800 MB/s
  • Interface typePCI-Express 3.0 x4
  • Form factorM.2 2280
  • Random read (4K)Up to 200,000 IOPS

Capacity 1TB

  • Sequential reads up to 1900 MBps cut load times
  • Sequential writes up to 1800 MBps speed large file saves
  • 600 TBW endurance rating supports heavy workloads
  • Graphene cooling layer lowers drive temperature by up to 10 °C
  • PCIe 3.0 x4 interface with NVMe 1.3 protocol fits M.2 2280 slots

1TB NVMe 1.3 PCIe 3.0 x4 drive

The HUADISK HYV1TBX3(XT) is a 1TB internal SSD in the M.2 2280 form factor. It uses 3D NAND flash and the NVMe 1.3 protocol over a PCIe 3.0 x4 interface. Sequential reads reach 1900 MBps and writes reach 1800 MBps. Random 4KB performance hits 200,000 read IOPS and 230,000 write IOPS.

Suits PCs and laptops needing a 1TB NVMe upgrade

This drive fits desktops and notebooks with an M.2 2280 slot that supports PCIe 3.0 x4 and NVMe 1.3. It works with Windows 8, 10, 11 and Linux; Windows 7 requires extra drivers. The 600 TBW rating covers heavy consumer workloads. Systems without an M.2 PCIe slot cannot use it.

Graphene heatsink keeps temps steady under load

A graphene layer reduces drive temperature by roughly 10°C during sustained transfers, 4K editing or gaming sessions. Active power draw is 3.23W and idle drops to 1.19W. The operating range spans 0°C to 70°C, so performance stays consistent inside a warm chassis. SMART monitoring and TRIM maintain long-term health.

How it compares

Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.

Price $103.99
Cheaper than about 71% of the 1,994 comparable items (median $180.49).
Total capacity 1 TB
Typical for this category: the median of 1,368 items is 1 TB.
Sequential read speed Up to 1,900 MB/s
Typical for this category: the median of 1,180 items is 2,400 MB/s.
Price per TB $103.99 per TB
Cheaper than about 83% of the 1,362 comparable items (median $165.50 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHUADISK
Product lineHYVXXXX3(XT)
Model nameHYV1TBX3(XT)
Total capacity1 TB
Product typeInternal Solid State Drive (SSD)
Intended useConsumer
Performance
Sequential read speedUp to 1,900 MB/s
Sequential write speedUp to 1,800 MB/s
Random read (4K)Up to 200,000 IOPS
Random write (4K)Up to 230,000 IOPS
Storage
Write endurance600 TB
NAND flash type3D NAND
Connectivity
Connection protocolNVMe 1.3
Ports & slots
Interface typePCI-Express 3.0 x4
Power
Active power draw3.23 W
Idle power draw1.19 W
Size & build
Form factorM.2 2280
Overall height22 mm
Overall width80 mm
Product depth2.1 mm
Product weight40g
Environment & compliance
Operating temperature range0 °C to 70 °C
Storage temperature range-20 °C to 75 °C
Operating humidity range5-95%

Other versions of this model

2 more in the same range

Questions about this item

Does my motherboard need a PCI-Express 3.0 x4 M.2 2280 slot for this drive to work?

Yes, the drive uses the PCI-Express 3.0 x4 interface in the M.2 2280 form factor, so the motherboard must provide that exact slot type.

Will the graphene heatsink on this 1TB drive fit inside my existing laptop chassis?

The drive measures 80mm long, 22mm wide and 2.1mm thick, so it fits standard M.2 2280 bays; the graphene layer does not add measurable height beyond that profile.

How can I verify the drive is delivering its rated 1900 MBps read speed after installation?

Run a sequential-read benchmark such as CrystalDiskMark; a result near 1900 MBps confirms the NVMe 1.3 controller and 3D NAND are performing to spec.

More in Internal NVMe & SATA SSDs

Similar items