Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a standard ATX 24-pin power connector to the proprietary 6-pin header used in HP Elite 8100, 8200, 8300 and 800G1 desktops
This cable adapts a standard ATX 24-pin power supply to the proprietary 6-pin header found on HP Elite 8100, 8200, 8300 and 800G1 desktops. It is a dedicated conversion cable for those specific models only. Builders upgrading the power supply in one of these small-form-factor PCs will need this exact pin-out to power the motherboard.
The 30cm length routes directly from the ATX connector to the white 6-pin socket on the motherboard. No tools are required beyond seating both ends firmly. The most common error is attempting to use the cable on an HP Z230 workstation, which uses a different pin arrangement and will not work. Verify the exact model number printed on the chassis before ordering.
The 6-pin header is a non-standard HP design that carries only the power rails required by these Elite platforms. It cannot deliver the full ATX pin-out, so any motherboard or add-in card that expects the complete 24-pin specification will not function. The cable is strictly a one-to-one adapter for the listed Elite desktops and cannot be repurposed for other systems.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Power on the HP Elite 8100 and verify the system posts and boots normally; the 24-pin to 6-pin adapter should deliver stable power without shutdowns.
The package contains one 30cm ATX 24-pin female to 6-pin male conversion cable only; you must supply a standard ATX power supply and the compatible HP Elite 8100, 8200, 8300 or 800G1 motherboard.
Use this 24-pin to 6-pin cable for HP Elite 8100, 8200, 8300 and 800G1 models; it is not compatible with the HP Z230.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?