We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver right-angle air nut runner with aluminum and steel housing, 13 1/8 inches long, 3/8 inch square drive

Ingersoll/Rand

Ingersoll/Rand 5RLN2C6 air nut runner 16 cfm 15 to 110 in-lb

SKU CH-ECCC-0YHQ7

Air-powered right-angle nut runner delivers 15 to 110 in-lb torque at 600 RPM using 16 cfm at 90 psi

  • Product typeAngle, Pitch & Slope Locators
  • Delivers 15 to 110 in-lb torque for versatile fastening
  • Runs at 600 RPM free speed for efficient operation
  • Consumes 16 cfm at 90 psi air pressure
  • Right-angle aluminium and steel handle fits tight spaces
  • Reversible air-powered design adds workflow flexibility

Air nut runner for general duty

The Ingersoll/Rand 5RLN2C6 is an air-powered right-angle nut runner built for general-duty fastening. It delivers a torque range of 15 to 110 in-lb with a maximum of 9.12 ft-lb at 90 psi. The 3/8 in square drive suits common automotive and assembly tasks. Reversible operation adds flexibility on the job.

16 cfm air consumption and torque headroom

At 90 psi the tool consumes 16 cfm and runs at 600 RPM free speed. It operates between 50 and 90 psi, so a compressor that can sustain 16 cfm at the upper pressure gives full torque headroom. Below 50 psi the runner will not reach its rated range. The side exhaust directs air away from the work area.

Right-angle aluminium and steel housing

The 13 1/8 in overall length and right-angle handle let the tool reach tight fasteners. Aluminium and steel construction keeps weight manageable while resisting shop wear. A 1/4 in NPT air inlet and 1/4 in minimum hose size simplify connection to standard shop air lines. The tool ships free from the supplier.

How it compares

Measured against everything we stock in Utility & Specialty Hand Tools, at today’s prices. Recalculated every night.

Price $1,790.99
Pricier than about 97% of the 2,474 comparable items (median $23.99).

Specifications

Product
Brand nameIngersoll-Rand
Product typeAngle, Pitch & Slope Locators

Questions about this item

Will my existing 1/4 in air hose and 90 psi compressor run this 16 cfm nut runner?

Yes, the tool requires a minimum 1/4 in hose and operates at 90 psi; your compressor must supply 16 cfm at that pressure for full performance.

How can I verify the 5RLN2C6 is delivering torque in the 15 to 110 in-lb range after installation?

Run the tool at 90 psi free speed of 600 RPM on a calibrated torque tester; the reading should fall within the 15 to 110 in-lb specification.

Does the box include the 3/8 in square drive anvil or must I buy it separately?

The 3/8 in square drive is built into the nut runner, so no separate anvil purchase is needed; only air hose and fittings are required.

More in Utility & Specialty Hand Tools

Similar items