We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight extended pneumatic die grinder in silver metal finish with barrel grip and locking throttle lever

Ingersoll/Rand

Ingersoll/Rand Air Die Grinder Extended Straight 18000 RPM M2X180RG4

SKU CH-XXHG-7SKGY

Extended straight pneumatic die grinder runs at 18000 RPM with 1 hp power and includes 1/4 in and 6mm collets

  • Product typeAir Grinders
  • 1 hp heavy-duty power for demanding grinding tasks
  • 18,000 RPM maximum speed enables fast material removal
  • Extended straight design reaches confined work areas
  • Includes 1/4 in and 6 mm collets for versatile bit fitment
  • Locking throttle lever prevents accidental start-up

Heavy-duty air die grinder for metalwork

This Ingersoll Rand air die grinder delivers 1 hp and a maximum speed of 18000 RPM for heavy-duty material removal. The extended straight barrel grip provides reach into tight cavities on automotive and industrial jobs. It ships with both 1/4 in and 6mm collets, piped exhaust and wrenches for immediate use.

Upgrade from lower-speed or fixed-length grinders

The jump is worth it when you need higher rotational speed and extended reach on a straight tool. A locking throttle lever adds controlled operation during prolonged sessions. The 3/8 in NPT female air inlet accepts standard shop supply lines without adapters.

Check air supply and collet compatibility before

Verify your compressor can sustain the required flow at pressure for a 1 hp pneumatic tool. Confirm the 3/8 in NPT female connection matches your hose fittings. Ensure the 1/4 in or 6mm collet sizes suit the accessories you plan to run.

How it compares

Measured against everything we stock in Air & Hydraulic Power Tools, at today’s prices. Recalculated every night.

Price $805.99
Pricier than about 92% of the 243 comparable items (median $61.99).

Specifications

Product
Brand nameIngersoll Rand
Product typeAir Grinders

Questions about this item

What air inlet size and thread type does the Ingersoll Rand M2X180RG4 require?

The grinder connects to a 3/8 in NPT female air inlet, so use a matching male fitting and hose with the same thread specification.

How is the collet installed on this die grinder, and what mistake should be avoided?

Insert the 1/4 in or 6 mm collet into the spindle, then tighten the supplied wrenches on the flats; do not overtighten or use pliers, which can distort the collet and cause runout.

What routine maintenance will the extended straight air grinder need over time?

Drain the air line daily, lubricate the motor with pneumatic tool oil through the inlet, and replace the collet or throttle lever if wear causes vibration or sticking.

More in Air & Hydraulic Power Tools

Similar items