Innocard EP8174 PCIe x8 Gen 5 ReDriver to MCIO 74P AIC
PCIe x8 Gen 5 ReDriver card with MCIO 74P connector extends 32 GT/s signals up to 22 dB at 16 GHz
- Adapter typePCIe Gen5
- Extends PCIe 5.0 signals to 32 GT/s with integrated ReDriver controller
- CTLE boost reaches 22 dB at 16 GHz for signal integrity
- Eight lanes bifurcate into two x4 links for flexible topology
- On-board 100 MHz clock buffer and PERST# gate support longer cable runs
- SMBus switch, I/O expander and WAKE# buffer enable out-of-band management
PCIe x8 Gen 5 ReDriver card
The Innocard EP8174 is an add-in card that converts an MCIO 74P connector to a PCIe x8 Gen 5 interface with a built-in ReDriver. It targets system integrators and OEMs who need to extend high-speed PCIe 5.0 signals across longer PCB traces or cables in servers and workstations. The card includes integrated clock buffering and SMBus management for remote port control.
Signal extension upgrade
This adapter replaces direct MCIO cabling or passive interposers when signal integrity at 32 GT/s over eight lanes degrades over distance. The jump is worth it when the platform requires CTLE boost up to 22 dB at 16 GHz, programmable linear equalization, and PERST or WAKE signal buffering to maintain link stability across extended routing.
Eight-lane headroom
The card comfortably handles PCIe 5.0 x8 or bifurcated x4/x4 topologies with 100 MHz clock distribution and 3.3 V auxiliary power protection. It runs out when the platform demands more than eight lanes, a different connector pitch, or active cooling not provided by the CEM slot power budget.
How it compares
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
- Price $163.99
- Pricier than about 91% of the 1,761 comparable items (median $18.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Adapter type | PCIe Gen5 |
Questions about this item
Does the EP8174 fit a standard PCIe x8 slot?
Yes, the card plugs into a PCIe CEM x8 slot and draws 3.3 V and auxiliary 3.3 V through that connector.
What is the step installers most often miss when fitting the EP8174?
Connecting the MCIO 74P cable before the ReDriver and clock buffer are powered — the 100 MHz buffer at address 0x6C and the PERST# gate need stable 3.3 V first.
Which on-board components of the EP8174 may need replacement after extended use?
The ReDriver controller, the SMBus switch at 0x70, the I/O expander at 0x20 and the clock buffer at 0x6C are the active ICs that can age.
More in Other Adapters & Couplers
Similar items
Cables To Go 03411 Two Port Keystone Single Gang Wall Plate White
- White
- With a wide selecti…
Innocard GHC38-1952 MCIO 38P PCIe 5.0 to U.2 100cm cable adapter
- PCIe Gen5
Monoprice Inc. 8729 S/PDIF Toslink gender changer White
- White





